Assemble the Pantry Cabinet Start by attaching the top and bottom shelves to the back. Keep the pocket holes hidden by positioning the back to face the wall, and the top and bottom pieces facing the floor and ceiling. When putting together these big plywood pieces, it helps to have a seco...
Fit both uprights in this manner, dry assemble the box and uprights, then span between the uprights with a straight edge from center line to center line as a quality control check. Make the Handle Mark the location of the handle tenons on the short edges of the lamination using a ...
Then, use the table saw's miter gauge and the tenoning jig to shape the tenons in the front-to-rear members. Run the outer edges of the cherry pieces over the edge-beading bit to produce the twin half beads as shown in the drawing. Assemble each frame with glue and clamp. When the...
Once you’ve built the frames (do not assemble them yet) it’s time to cut all the louvers to length, drill them for the end pins and control arm. The prints tell you exactly how long each louver should be. If you buy them from Rockler they will come slightly longer than you need....