•Upgrade the firmware of the router (system will reboot automatically).•Restore the router to its factory defaults (system will reboot automatically).•Update the configuration with the file (system will reboot automatically).1.Visit http://tplinkwifi.net, and log in with the username ...
TP-LINK stock firmware for the TL-WR840N v6 Stock firmwares for the TL-WR840N v6 are available under the download section on the modem's support page. You can also refer to the router's manual for instructions on how to upgrade the firmware. Similar...
•Upgrade the firmware of the router.•Check the TCP/IP settings on the particular device if all other devices can get internet from the router.If the IP Address is 0.0.0.0, please try the methods below and try again:•Make sure the physical connection between the router and the ...
* To avoid device damage, do not disconnect or power off your router during the upgrade. 2.2. The Back Panel The following parts (view from left to right) are located on the rear panel. Item Description Power Port For connecting the router to a power socket via the provided power ad...
15. IPv6This function allows you to enable IPv6 function and set up the parameters of the router’s Wide Area Network (WAN) and Local Area Network (LAN).15.1. IPv6 Status1.Visit http://tplinkwifi.net, and log in with the username and password you set for the router....