L. Wang et al., Twin-Wire Plasma Arc Additive Manufacturing of the Ti–45Al Titanium Aluminide: Processing, Microstructures and Mechanical Properties, Intermetallics, 2021, 136, p 107277. https://doi.org/10.1016/j.intermet.2021.107277 Article CAS Google Scholar J. Chi et al., Effects of Hea...
H. Lee, "Synthesis of titanium dioxide in O2/Ar/SO2/TiCl4 microwave torch plasma and its band gap narrowing," Current Applied Physics, vol. 11, no. 3, pp. 517-520, 2011.Hong, Y.C.; Lho, T.; Lee, B.J.; Uhm, H.S.; Kwon, O.P.; Lee, S.H. Synthesis of titanium dioxide...
Liu HW, Bishop DP, Plucknett KP (2017) Densification behaviour and microstructural evolution of Ti-48Al consolidated by spark plasma sintering. J Mater Sci 52(1):613–627.https://doi.org/10.1007/s10853-016-0358-x ArticleCASGoogle Scholar Han J et al (2016) (2017) Microstructure and mecha...
They act as a suspension in the plasma jet that is emanated from a plasma torch [57]. In 2001, Liu et al. explained that the wollastonite powder started to decompose while being applied onto Ti-6A1-4 V via the plasma spraying technique due to the high velocity impact of wollastonite ...
Resistance, plasma arc, electron beam and friction welding are also used on titanium to a limited extent. All of these processes offer advantages for specific situations. However, the following discussion will be concerned primarily with GTA and GMA welding. Many of the principles discussed are ...
Nanocrystalline titanium nitride (TiN) particles were directly synthesized in an atmospheric microwave plasma torch, using gas-phase titanium tetrachloride (TiCl 4 ), with N 2 and H 2 as reactants. The gas-phase TiCl 4 was injected with H 2 gas into the microwave plasma-torch flame generated...
CONSTITUTION: The titanium dioxide plate for decomposing air and water polluting substances is manufactured by oxidizing a titanium plate, wherein the titanium plate is oxidized by using a plasma equipment or a torch, and wherein the titanium dioxide plate is manufactured by oxidizing the titanium ...
High-temperature treatment is carried out in stream of low-temperature nitrogen plasma at plasma temperature of 4,000–6,000°C a plasma torch power of 2.4–3.6 kW/h and a plasma flow rate of 45–50 m/s. Feed rate of the initial mixture is 150–180 m/s. Product is cooled in a ...
It is also shown that it is difficult to promote a CET with plasma transferred arc WAAM as computational fluid dynamics (CFD) melt-pool simulations indicate that the solidification parameters remain within the columnar region on the Semiatin-Kobryn Hunt map, within the constraints of a stable ...
Kwak, "The behavior of titanium, stainless steel and copper-nickel alloys as plasma torch cathodes," Plasma Chemistry and Plasma Processing, vol. 16, no. 4, pp. 577-603, 1996.R.J. Munz, and J.E. Kwak, "The behavior of titanium, stainless steel and copper- nickel alloys as plasma ...