备份Vbios时BI..765m的W350,系统win8,确认已经开启了独显用GPUz(0.7.8)备份vBIOS的时候就会跳出这个东西设置了禁用驱动强制签名,之前没禁用的时候nvflash(5.161)提示 找不到nvid
前几天也出现过,但是我手动按关机键关机后再开,又能开,提示there is no vbios support detected in this card,csm/uefi mode会改为uefi。然后就进去了。现在就一直重启进不去,屏幕不亮。显卡和内存条也重插试过了,现在就是不知道是硬件问题还是软件问题,问下大家。 幵开幵 初级粉丝 1 楼主解决了吗,我也...
@ Hefezopfwrote: N2HET58W (1.41) The problem occured when I updated to this BIOS version. Looking at the readme for v1.41, please note the part I've bolded below. Since you're at this version there is no rollback to an earlier version possible. That's why...
BIOS Version: P89 v.2.72iLO4: 2.62Smart Array P440ar: 5.04, with local disks no SAN There is no MicroSD Kit installed. I didn't find any solution on internet, I also set the BIOS to default still problem exist. Any ideas? Regards, Francesco 15 people had this probl...
It has progressed to the point that if there is an AMD driver installed on my PC, I cannot boot past the bios unless I am in safe mode. Furthermore, if I attempt to install an AMD driver using the Adrenaline software, it will crash every time at around 70% of the way through the...
I checked in Device Manager and it installed the same version I had before but I suppose uninstalled it cleaned up some bad setting somewhere. For what it's worth the "Performance" tab in Task Manager still crashes. Seems the issue wasn't caused by Windows Terminal at all in my case. ...
VBIOS Version: 113-C905A1-007 EFI Driver Version: 01.00.799 Metal: Supported, feature set macOS GPUFamily2 v1 Displays: iMac: Display Type: Built-In Retina LCD Resolution: 5120 x 2880 Retina Framebuffer Depth: 30-Bit Color (ARGB2101010) Main Display: Yes Mirror: Off ...
请填写以下信息. Please fill in the following information. Install ENV: (You can find it in the boot interface.) DMI: CPU: NIC: (pid & vid) RR version: (You can find it in the update menu.) RR: 24.8.4 addons: n/a modules: n/a lkms: n/a DSM: mode...
I uninstalled XTU with the steps you linked (the additional steps too), rebooted, reset BIOS to defaults and Installed the brand new XTU version. The problem still persists on the newer XTU version. This sistem was built in december '21, and now I'm trying to...
I updated the BIOS and iLO firmware versions, but the problem is still happening. The P840 raid controller contains add-on cache memory. When the add-on card is removed, the server boots up properly. As the result, I cleaned the add-on card connector and installed it...