In this study, the glycerol and polyethylene glycol (PEG 600) are used as hydrogen bond donors while choline chloride (ChCl) as a salt to synthesise DESs. The glycerol based DESs were formed with ratio of 1:2, 1:3, 1:4 and 1:5 whereas novel three-component DESs of ChCl, PEG and...
Preparation and Thermophysical Properties of Water–Glycerol Mixture-Based CuO Nanofluids as PCM for Cooling Applications An experimental study has been conducted in order to investigate the thermophysical properties of water-glycerol mixture-based nanofluids containing CuO na... Harikrishnan,S,Roseline,.....
GlycerolEmulsifier stabiliser1.6 2.2. Methodology Testing different PCM with different emulsifiers needs an efficient screening strategy and continuous analysis of viscosity,particle size distribution, stability (short and long term) and thermophysical properties. ...
Nanofluid is a suspension of nanoparticles which is promising heat transfer fluid in the heat transfer enhancement having a plethora of applications because of its superior thermal conductivity and rheological properties. This paper points out the previous studies and recent progress in the improvement of...
The technique was used to tackle the challenge to investigate the relaxation behavior of the heat capacity of the glassformer glycerol, and thus supply information that can be compared with the relaxation features of other, classically investigated physical properties of glassformes such as the ...
In this study, the Deep Eutectic Solvent (DES) is prepared based on glycerol and polyethylene glycol 600 (PEG) as hydrogen bond donor and choline chloride (ChCI) as hydrogen bond acceptor. The glycerol based DESs were formed with ratio of 1:2, 1:3, 1:4 and 1:5 whereas three-component...
thermophysical propertiesdensitysound velocityheat capacityJoule-Thomson CoefficientA vibrating tube density meter (VTD) was used to measure density of pure glycerol at different isotherms between 298.16 to 423.12 K, and a pressure range up toAhmadi, Pezhman...
Ethyl ammonium chloride (EAC), and zinc (II) chloride (ZnCl2) were selected as the HBAs, whereas glycerol (Gly) was the HBD. Their thermophysical properties namely, melting point, degradation temperature, density, viscosity, acidity, miscibility, refractivity and electrical conductivity were measured...
Aubry, Thermophysical and bionotox properties of solvo-surfactants based on ethylene oxide, propylene oxide and glycerol, Green Chem. 9 (2007) 491-499.Queste S, Michina Y, Dewilde A, Neueder R, Kunz W, Aubry JM. Thermophysical and bionotox properties of solvo-surfactants based on ethylene...
A combined experimental and theoretical study on the micro and macroscopic properties of liquid mixtures containing glycerol, as common component, and 2-butanol, 2,3-butanediol, 2-methyl-1-propanol, and benzyl alcohol is reported in this work. Thermophysical properties were measured over the whole ...