D. (1987). Thermal degradation characteristics of poly (acrylamide-co-acrylic acid) and poly (acrylamide-co-sodium acrylate) copolymers. Thermochimica acta, 121, 295-306.J.J. Maurer, G.D. Harvey, Thermal degradation characteristics of poly (acrylamide-co-acrylic acid) and poly (acrylamide-co-...
Jose J, Shehzad F, Al-Harthi MA (2014) Preparation method and physical, mechanical, thermal characterization of poly(vinyl alcohol)/poly(acrylic acid) blends. Polym Bull 71:2787-2802Shehzad.F. e Jobin.j, "Preparation method and physical, mechanical, thermal characterization of poly(vinyl ...
Thermal stability and degra2 dation mechanisms of poly (acrylic acid) and its salts. Part 1. Poly(acrylic acid) [J ]. Poly Deg Stab ,1990 ,29 :233 - 246.McNeill, I.C. and Sadeghi, S.M.T., Thermal Stability and Degradation Mechanisms of Poly (acrylic acid) and its Salts(Na and...
In this work, a thermal and a dynamic mechanical study of new formulations self-curing acrylic bone cements is reported. The basic formulation of poly(methylmethacrylate) (PMMA)-based acrylic bone cements has been modified with biodegradable polyesters such as poly(l-lactic acid), poly(β-hydroxy...
Güven, “The effect of external stimuli on the equilibrium swelling properties of poly(N-vinyl 2-pyrrolidone/itaconic acid) poly-electrolyte hydrogels,” Polymer, vol. 40, no. 4, pp. 913–917, 1999. [5] C. S. Brazel and N. A. Peppas, “Synthesis and characterization of thermo- and ...
The present study concentrated on estimating the thermal conductivity, stability, efficiency, and resistance of a heat pipe for heat exchangers, which were essential for many industrial applications. To achieve this, copolymer of amphiphilic poly (styren
Synthesis and characterization of organic–inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica polymer moiety showed much better film uniformity, thermal stability and mechanical properties than the poly(methyl methacrylate) (PMMA) based hybrid materials... Yang-Yen Yu a,...
The TPP was performed by localized photopolymerization within a 50 µL droplet of the non-aqueous printing composition, followed by rinsing in ethanol to remove the unpolymerized material. Finally, the printed structures were immersed in water, kept wet for light microscopy characterization, or ...
2.6. Characterization The functional group of each material was characterized using FT-IR Bruker Opus Alpha 7.5 with resolution of 4 cm−1. The thermal stability was determined using DTG-60 (Shimadzu) in the range temperature of 30–600 °C with heating rate of 10 °C/min. The heating pr...
Characterization of thermal reaction by peak temperature and height of DTG curves Thermochim. Acta (1995) N.Kiranet al. Recyling of plastic wastes via pyrolysis Resour. Conserv. Recycl. (2000) D.K.Mandalet al. Radiation-induced grafting of acrylic acid onto polypropylene film and its biodegradabi...