In a method for testing a pressure sensor of a fuel accumulator device in an internal combustion engine, the pressure in the fuel accumulator device is altered and the influence of said alteration on the torque generated by the internal combustion engine is determined. A deviation of the ...
In this project, EDF provided a pre-irradiated fuel pin, CEA equipped the fuel pin with a centerline thermocouple and a pressure sensor, and SCK CEN is carrying out the irradiation test in the PWC rig of BR2.Springer USJOMBosch, Rik-WouterSCK CEN (Belgian Nuclear Research Centre), Mol, ...
The apparatus also has an air supply to inflate the seals; a water supply to supply water to the testing zone; a pressure sensor between the seals of each pair to detect incomplete sealing between the seals, when they are inflated, and the inner walls of the pipe; and a pressure sensor...
Then, depending on the trouble code, the sensor signal must be tested with a scan tool. For example, see this chart of the air-fuel ratio sensor signal on a scan tool: when the engine is revved, the signal jumps to "rich", then as the RPM drops and the fuel is cut off, the sen...
According to the car's factory service manual, the only players in the fuel metering game are: the manifold absolute pressure (MAP) sensor the engine coolant temperature (ECT) sensor (aka the water temp sensor WTS) the throttle position (TP) sensor the heated oxygen sensor (HO2S) engine ...
This facility is a high Reynolds number transonic wind tunnel of Göttingen-type. The test section has dimensions of 2.0 m x 2.4 m and can be operated with closed or slotted walls. The Mach number range is from 0.15 to 1.35. The wind tunnel can be operated at a total pressure range ...
to the inputs of which a differential pressure sensor is connected at the inlet and outlet of a chamber for placing tested materials and/or elements, a fuel consumption meter, as well as a water meter connected to a closed pipeline loop, two a hydraulic valve, a spring-loaded ring located...
测试设备制造商 - 测试实验室 - 产品开发 - 工作强度 - 轻量化结构 您创新和可靠的测试技术合作伙伴 30多年前,作为TU Clausthal的分支机构成立,家族企业SincoTec现在是谐振技术和创新测试机械的全球领导者。 认可…
The canister purge solenoid (CPS), canister vent solenoid (CVS) and fuel tank pressure sensor (FTPS) are the heart of the system. The CPS is a duty-cycle-controlled, normally closed solenoid that separates the engine from the gas vapor system. The PCM operates the CPS to pull gas vapors...
In addition, the unique sensor can measure acidity and pollution from soot, dust, dirt, worn metal, fuel, water or antifreeze Easy to operate--- The engine oil checker with a plastic dropper is easy to operate. Use t...