MTBF Telcordia_SR-332 Issue 4 2016 下载积分: 2000 内容提示: Reliability Prediction Procedure forElectronic EquipmentSpecial ReportSR-332Issue 4, March 2016Enterprise License RestrictionsThis document is available only via an Enterprise License (EL), and canonly be shared among the EL licensees of ...
Reliability Prediction Procedure forElectronic EquipmentSpecial ReportSR-332Issue 4, March 2016Enterprise License RestrictionsThis document is available only via an Enterprise License (EL), and canonly be shared among the EL licensees of this document. Violators ofthe EL agreement may be subject to da...
可靠性预计标准很多,不过332是比较常用的一个标准,网上找到这份最新版的 Telcordia_SR-332 Issue 4 2016 ,分享给大家。 后更新汇总: 1) Telcordia SR-332 Issue1 May2001 2)Telcordia SR-332 Issue2,September 2006 3) Telcordia SR-332 Issue3 (Jan-2011) 4) Bellcore TR-332 ISSUE6,DECEMBER 1997 5...
Telcordia SR-332标准的全称是Reliability Prediction Procedure for Electronic Equipment,中文意思是电子设备可靠性预测程序。此标准由爱立信公司旗下的 Telcordia Network Infrastructure Solutions(“NIS”)发布,目的是记录用于预测设备和单元硬件可靠性的推荐方法。此标准还记录了预测串行系统硬件可靠性的推荐方法。它包含供...
The Telcordia SR-332 Standard also provides models for predicting the failure rates of units and devices during the first year of operation. The failure rate during this wear-in phase is expressed as a multiplying factor operating on the predicted steady-state failure rate. This First Year Multip...
GJB/Z 299C和SR-332元器件应力法的对比 目前可以接触到的GJB/Z 299C和SR-332标准分别发布于2006年和2016年。 ①可靠性模型选用的侧重点不同 在GJB/Z 299C的应力法介绍中,主要侧重于各类元器件的应力法模型,即如何得出在一定的环境应力条件下的元器件工作失效率,并没有规定可靠性建模的类别。体现了军用标准的...
Telcordia SR-332标准解析 Telcordia SR-332是电子设备可靠性预测的重要标准,全称为Reliability Prediction Procedure for Electronic Equipment(电子设备可靠性预测程序)。以下是对该标准的详细解析: 一、标准概述 Telcordia SR-332标准最初由贝尔通信研究公司开发,现为整个电信行业广泛采用。它提供了一套详细的指导方针,用...
TelcordiaSR-332是一项通用的可靠性设计和评估标准,被广泛应用于电子和通信设备领域。以下是一些重要的标准要点: 测试时间和样本数目:标准规定了MTBF测试的时间长度和样本数目,以在一定的置信度水平上得出可靠性指标。 故障数据的收集和分析:标准提供了指导以收集和分析故障数据,并将其应用于MTBF测试计算。 可靠性指标的...
MTBF试验的检测标准通常为MIL-HDBK-217F或者Telcordia SR-332。MIL-HDBK-217F是美国军事标准,适用于多种设备的可靠性预测,而Telcordia SR-332则是一种通信设备可靠性预测标准。 样品准备 MTBF试验的样品通常需要满足一定的要求,包括设备的完整性、适应性、可检测性和可控性等。在选择样品时,需要考虑到设备的品牌、...
Also, we can perform a Telcordia SR-332 Issue 1 to Issue 2 upgrade service as well. And it doesn't matter what standard you originally used - ReliaSoft, Relex, Isograph - we can use them all. Our experience has shown Telcordia SR-332 Issue 2 will give you a much more ...