1. De-case the camera, and remove the board from the case 2. Either make a [clamp](https://www.printables.com/model/139112-pogo-pin-clamp-block-for-use-with-flash-adapter-wi) or solder on wires onto the 4 pads on the back of the board starting with 'TP501' 3. Hook up a CHA...
A:Please check if the Ethernet cable is still properly connected to the camera. After setting up the camera through Ethernet in the APP, the camera's default Wi-Fi SSID should disappear. However, if the Ethernet cable is disconnected, the camera will enter setup mode again with the status ...
You can, however, establish privacy zones to block views of your neighbors’ doors or windows. Motion in these zones will be ignored, but that’s not as desirable as being able to ignore the motion from people walking down a sidewalk or a swaying bush in the camera’s field of view ...