sudo tailscale up --advertise-routes 10.9.97.0/24 --advertise-exit-node --reset 10.9.97.0/24替换为自己的网段,可以是IPV4或者IPV6。 启用Linux 上的 IP 转发(IP Forwarding) echo'net.ipv4.ip_forward = 1'|sudotee-a /etc/sysctl.confecho'net.ipv6.conf.all.forwarding = 1'|sudotee-a /etc/s...
1、主机启用 IP 转发IP Forwarding echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf 2、主机作为子网路由网关Subnet Route,连接到tailscale sudo tailscale up --advertise...
1、主机启用 IP 转发IP Forwarding echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf 2、主机作为子网路由网关Subnet Route,连接到tailscale sudo tailscale up --advertise...
此时,只有连接到 Tailscale 的设备可以互相访问,并不能直接使用内网 IP 来访问整个局域网,我们还需要进行以下配置 开启IP 转发 编辑sysctl.conf文件vim /etc/sysctl.conf 将以下代码取消注释 net.ipv4.ip_forward=1 net.ipv6.conf.all.forwarding=1 加载内核参数sysctl -p 添加子网路由 例如我的路由器地址为 10.0...
启用Linux上的IP转发(IP Forwarding) 因为「Subnet Route」的设定需要用到 IP 转发(IP Forwarding)特性 使用以下指命启用 echo'net.ipv4.ip_forward = 1'| sudo tee -a /etc/sysctl.conf echo'net.ipv6.conf.all.forwarding = 1'| sudo tee -a /etc/sysctl.conf ...
After you enable IP forwarding, run tailscale up with the --advertise-routes flag. It accepts a comma-separated list of subnet routes. sudo tailscale up --advertise-routes=192.0.2.0/24,198.51.100.0/24 Make sure to replace the subnets in the example above with the correct ones for your ne...
See https://tailscale.com/kb/1104/enable-ip-forwarding/ 看上面的错误提示IP forwarding is disabled,打开IP forwarding vi /etc/sysctl.conf # 添加或者修改ip.fordward节点值配置转发 net.ipv4.ip_forward=1 net.ipv6.conf.all.forwarding=1 重启服务 查看是否成功,如果返回为“net.ipv4.ip_forward = 1...
Enable IP forwarding. Configure the Tailscale client. Make sure to replace<CIDR>with the correct subnet routes. For the192.0.2.2subnet router, use192.0.2.0/24. For the172.16.100.2subnet router, use172.16.100.0/24. tailscale up --advertise-routes=<CIDR>--snat-subnet-routes=false --accept-route...
Enable IP Forwarding This method will vary depending on your Linux distribution, so please check their documentation as well, and always check the Tailscale docs to make sure you are aware of any updates. 9 1 2 3 echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf ...
echo 'net.ipv4.ip_forward = 1' | sudo tee -a /etc/sysctl.conf echo 'net.ipv6.conf.all.forwarding = 1' | sudo tee -a /etc/sysctl.conf sudo sysctl -p /etc/sysctl.conf 将本地子网添加到路由中 通告子网路由 tailscale set --advertise-routes=192.168.0.0/24,192.168.1.0/24 ...