CRYSTALLINITYX-ray diffractionX-ray spectroscopyPurpose: To use the L25 Taguchi orthogonal array for optimizing the three main solvothermal parameters that affect the synthesis of metal-organic frameworks-5 (MOF-5). Methods: The L25 Taguchi methodology was used to study various paramete...
In Taguchi optimization method, control factors are varied according to certain standard orthogonal arrays (OAs). In this study, we have considered five factors at each of the five levels, therefore L25orthogonal array is chosen whose structure is shown in TableS1in supplementary document. It can ...
An L25 (55) orthogonal array was selected as the experimental plan for the five parameters mentioned above. Performance measure analysis was followed by performing a variance analysis, in order to determine the optimum levels and relative magnitude of the effect of parameters. The obtained results ...
作者: Rajeev Kharb, Vikash Kumar 摘要: Newfangled Quantitative Pharmacia (Isradipine) Stratagem: Quality by Design (Qbd) Taguchi Array via Response Surface (L25 Via CCD20) Methodology Abstract. DOI: 10.4172/21532435.1000411 被引量: 4 年份: 2015 收藏 引用 批量引用 报错 分享 全部...
Taguchi method was used to examine high energy ball mill characteristics when producing micro/nano-particles of Simplicia powder using Orthogonal Array (OA) L25. Two factors and five levels were selected for the smallest diameter. The av... F Ridwan,M Fadel - 《Iop Conference》 被引量: 0发...
constru cted fo r this stu dy that consisted of L25 (5 ) orthogona1 array 『161.The degr ee o f infl uence o f indi— vidual p aram eter and the best co--optimiz at io n comb i-- natio n o f these param eters fo r bio leaching of metals fr om sulp hide ore sa...
The experiments were designed by the Taguchi L25 orthogonal array to analyze and obtain the important parameters. Then, to evaluate the optimal combination of parameters in the laser engraving process. The research results show that the influence of the factors P, S tak...
Taguchi's L25 orthogonal array (OA) design and signal- to- noise ratio (S/N ratio) have been used in this study. Penetration (P), bead width (W), reinforcement (R) and heat affected zone (HAZ) are selected as objective functions. The Taguchi method followed by Grey relational analysis...
By using Taguchi orthogonal (L25) array, five parameters (time, temperature, oxygen pressure, pulp density and acid concentration) at five levels were selected for 25 experiments. The experiments were designed and carried out in a high-pressure reactor in the presence of nitric acid as solvent ...
Mixer fill rate and mixing time with five levels were adopted to a 52 full factorial design and analysed in Taguchi L25 orthogonal array. The signal-to-noise ratios for responses were determined and used to calculate weight factors. A new approach, Taguchi weighted Grey...