I am having trouble using the DPAA FMan Coarse Classifier on the T1040D4RDB. As far as I can tell, I have fully set up this software on the board. When booting, the microcode is loaded correctly, the clock is selected and turned on, and I can print in memacEndRxHandle ea...
It is also noteworthy that the LAWBAR for the SB_log.txt is different. LAWBARH01 to LAWBARH04 is repeated in LAWBARH05 to LAWBARH08. It is setting up DPAA (QMAN, BMAN, etc), not PCIe windows. i.e. LAWBARH01: 0x0000000f LAWBARL01: 0xf4000000 LAWAR01: 0x81800018...
On our system, the user apps will send/receive the packets via socket from dpaa ethernet device. But we found the packets received from Ethernet device are out of order for those connection-less flows. I saw some documents said that the 'Order Restoration' or 'Order Preservation' c...
Or have I overlooked some points (e.g. regarding the initialisation of the DPAA / FMAN)? Maybe you can share some advice. Thanks and best regards, Stefan Original Attachment has been moved to: T1040RDB_upstream_bootlog.txt.zip Original Attachment has been moved to: T1040RDB_sdk_bootlog...
Found /fsl,dpaa/dpa-fman0-oh@2, Tx Channel = 80a, FMAN = 0, Port ID = 1 apps/lib/usdpaa_netcfg_layer.c:577:usdpaa_netcfg_acquire(): fmc_netcfg_get_info() error: failed to load configuration I don't understand what I'm doing wrong... Thank you 0 Kudos Reply All forum...
It is setting up DPAA (QMAN, BMAN, etc), not PCIe windows.i.e.LAWBARH01: 0x0000000f LAWBARL01: 0xf4000000 LAWAR01: 0x81800018(EN: 1 TGT: 0x18 SIZE: 32 MiB)LAWBARH02: 0x0000000f LAWBARL02: 0xf6000000 LAWAR02: 0x83c00018(EN: 1 TGT: 0x3c SIZE: 32 MiB)LAWBARH03: 0x...
It is setting up DPAA (QMAN, BMAN, etc), not PCIe windows.i.e.LAWBARH01: 0x0000000f LAWBARL01: 0xf4000000 LAWAR01: 0x81800018(EN: 1 TGT: 0x18 SIZE: 32 MiB)LAWBARH02: 0x0000000f LAWBARL02: 0xf6000000 LAWAR02: 0x83c00018(EN: 1 TGT: 0x3c SIZE: 32 MiB)LAWBARH03: 0x...
On our system, the user apps will send/receive the packets via socket from dpaa ethernet device. But we found the packets received from Ethernet device are out of order for those connection-less flows. I saw some documents said that the 'Order Restoration' or 'Order Preservation' can help...
Or have I overlooked some points (e.g. regarding the initialisation of the DPAA / FMAN)? Maybe you can share some advice. Thanks and best regards, Stefan Original Attachment has been moved to: T1040RDB_upstream_bootlog.txt.zip Original Attachment has been moved to: T1040RDB_sdk_bootlog...
fsl_dpaa_mac ffe4e8000.ethernet eth0: init_phy() failedIP-Config: Failed to open eth0IP-Config: Device `eth0' not foundFreeing unused kernel memory: 400KThis architecture does not have kernel memory protection.Run /init as init processcreated directory: '/mnt/longterm'rand...