(pack)合并数组:将数组大小的定义放在等式左边 bit [3:0][7:0] bytes; //4个字节组成一个字,储存空间一个字。 (unpack)非合并数组:将数组大小的定义放在等式右边 bit [7:0] bytes [4]; //4个字节,这个仍是合并数组,但是4个存储空间不连续,这是非合并数组 unpacked array会被认为是一个vector,packed ...
在前面定义一个动态数组: byteunsigned emac_data[];//用于将接收到的 emac 帧入队在后面将 transaction 拆包成 byte 数组时,用到成员函数 pack_bytes( )。 emac_size=emac_tr.pack_bytes(emac_data)/8;//将接收到的 emac_tr 帧存到 emac_data 缓冲区中该成员函数中传入的参数只能是动态数组类型的。在...
data_q={>>byte{{<<byte{tr.dmac}},{<<byte{tr.smac}},{<<byte{tr.ether_type}},{>>byte{tr.payload}},{<<byte{tr.crc}}}; 最后说一下,通过UVM field automation 的pack_bytes的效果类似于 data_q={>>byte{tr.dmac,tr.smac,...,tr.payload,tr.crc}};...
// user functions virtual function void pack(ref bytes[]); virtual function void unpack(const ref bytes[]); // other function declarations omitted endclass 1. 2. 3. 4. 5. 6. 7. 函数参数中的缺省值 SystemVerilog允许给函数设置缺省值。如果没有给参数指定值,并且参数有缺省值,那么函数将使用参...
virtualfunctionvoidpack(refbytes[]); virtualfunctionvoidunpack(constrefbytes[]); // other function declarations omitted endclass 函数参数中的缺省值 SystemVerilog允许给函数设置缺省值。如果没有给参数指定值,并且参数有缺省值,那么函数将使用参数的缺省值。此指定缺省值的语法和C++类似. ...
3 unpack与pack数组,如unpack a[0]与a[1]占各自占32位的一位;pack压缩,a[0],a[1]共用一个32位 4 class 5 strings:内建string支持 6 enum枚举类型,增加代码可读性 verilog对于赋值全1比较麻烦 system verilog的解决方案 logic很通用,除了不能用于双向口,双向口必须用wire ...
pack_unpack_array.v Added module to pack Verilog-2001 arrays Oct 17, 2019 pattern_detect.sv Pattern is being detected in any bit position now Feb 6, 2023 pattern_detect_tb.sv Pattern is being detected in any bit position now Feb 6, 2023 ...
_u;instruction_u cmd;打包的结构打包的联合cmd31:0cmd.fields.opcode15:0cmd.fields.arg17:0cmd.fields.arg27:0cmd_t 的区域cmd.byte1cmd.byte0cmd.byte2cmd.byte3typedef logic 7:0 byte_t;typedef struct packed logic 15:0 opcode;logic 7:0 arg1;logic 7:0 arg2; cmd_t;typedef union pack...
,typedef struct packed logic 15 : 0 src_addr; logic 15 : 0dest_addr; logic 23 : 0 data; logic 7 : 0 opcode; data_pack 17、ed_t; union packed data_packet_t packet; logic 7 : 07 :0 bytes; /压缩数组 dreg;,5.2.3 压缩联合体,always (posedge clk, negedge resetn) if (!resetn...
(); data_size = ip_tr.pack_bytes(data_q) / 8; m_tr = new("m_tr"); assert(m_tr.randomize with{m_tr.pload.size() == data_size;}); // for(int i = 0; i < data_size; i++) begin m_tr.pload[i] = data_q[i]; end `uvm_send(m_tr) end #100; endtask `uvm_...