[root@Squid-Server ~]# cd /usr/src/squid-3.5.26/ [root@Squid-Server squid-3.5.26]# more INSTALL /* * Copyright (C) 1996-2017 The Squid Software Foundation and contributors * * Squid software is distributed under
/* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---*/ /* Enable HSE */ RCC->CR |= ((uint32_t)RCC_CR_HSEON); //使能HSE:RCC_CR_HSEON=0x00010000(修改的是第16位HSEON) /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CR & RCC_CR_HSE...
Ensure the system is powered on.Configure an Ethernet port on the personal computer to enable Dynamic Host Configuration Protocol (DHCP) configuration of its IP address and DNS settings. If you do not have DHCP, you must manually configure the personal computer. Specify the static IPv4...
when the server restarts, the server is stuck in "system initializing", I've tried changing the CMOS battery, cleaning the RAM, removing the hard drive, and unplugging the power supply, but the problem still hasn't been solved Hi PutraJr_ind Can you try to log in to the IMM to c...
10:28:05.280 [main] WARN o.m.s.m.ClassPathMapperScanner - [warn,44] - No MyBatis mapper was found in '[com.xueyi.**.mapper]' package. Please check your configuration. 10:28:06.721 [main] INFO o.a.c.h.Http11NioProtocol - [log,173] - Initializing ProtocolHandler ["http-nio-9600...
02:03:35.268 [main] INFO c.r.s.RuoYiSystemApplication - [logStartupProfileInfo,638] - The following 1 profile is active: "dev" 02:03:46.255 [main] INFO o.a.c.h.Http11NioProtocol - [log,173] - Initializing ProtocolHandler ["http-nio-9201"] ...
118 Recovering the vital product data information if the partition does not IPL in A-mode or B-mode121 Setting up your disk configuration after installing the Licensed Internal Code and initializing the system... 122 Using System i Navigator to set up your disk configuration after installing Lice...
Initializing the Storage SystemThis section describes how to perform initial configuration on the device after it is powered on. DeviceManager, DME IQ, or SmartKit can be used to initialize a storage system. You can use DeviceManager to initialize a single device if you want to manually ...
If an LLD template is available in the system, configure the management IP address and storage IP address of the faulty node by referring to Installation Procedure (Applicable to LLD-based Configuration) > Initializing Nodes Using the Deployment Assistant of SmartKit in the corresponding...
using System; using System.Diagnostics; using System.ComponentModel; namespace MyProcessSample { class MyProcess { public static void Main() { try { using (Process myProcess = new Process()) { myProcess.StartInfo.UseShellExecute = false; // You can start any process, HelloWorld is a do-no...