timerStop(1) 6、sys.timerStopAll(fnc) 关闭同一回调函数的所有定时器。 参数: 返回值: 无 例子: timerStopAll(cbFnc) 7、sys.timerStart(fnc, ms, ...) 开启一个定时器。 参数: 返回值: number定时器ID,如果失败,返回nil。 例子: 8、sys.timerLoopStart(fnc, ms, ...) 开启一个循环定时器。 参...
SysTick_CTRL_TICKINT_Msk | SysTick_CTRL_ENABLE_Msk;/* Enable SysTick IRQ and SysTick Timer */return(0);/* Function successful */} 从上述代码中可以看到,其将传入的充值初值设置到了SysTick->LOAD,当前计数值SysTick->VAL归零,设置SysTick->CTRL使能中断和定时。 在系统中断服务程序gd32f4xx_it.c...
9.*/10.voidbsp_StartAutoTimer(uint8_t _id, uint32_t _period)11. {12.if(_id >=TMR_COUNT)13. {14./*打印出错的源代码文件名、函数名称*/15. BSP_Printf("Error: file %s, function %s()\r\n", __FILE__, __FUNCTION__);16.while(1);/*参数异常,死机等待看门狗复位*/17. }18.19. ...
A start value of0 is possible, but has no effect because the SysTick exception request and COUNTFLAG areactivated when counting from 1 to 0.The RELOAD value is calculated according to its use:l To generate a multi-shot timer with a period of N processor clock cycles, use a RELOADvalue ...
1/*2* @brief Initialize and start the SysTick counter and its interrupt.3* @param ticks number of ticks between two interrupts4* @return 1 = failed, 0 = successful5* Initialise the system tick timer and its interrupt and start the6* system tick timer / counter in free running mode to...
通过函数bsp_InitTimer初始化滴答定时器和实现软件定时器所需的结构体。 2、 第2阶段,软件定时器初始化: 可以通过函数bsp_StartTimer做单次定时器初始化,单次定时器执行一次就结束。下次还想使用,需要重新创建。 可以通过函数bsp_StartAutoTimer做周期性定时器初始化,可以周期性的一直运行下去。
SysTick_CTRL_ENABLE_Msk;/* Enable SysTickIRQ and SysTick Timer */return(0);/* Functionsuccessful */} 在这个函数定义的前面有关于它的注释,如果我们不想去研究它的具体实现,可以根据这段注释了解函数的功能:这个函数启动了 SysTick ; 并把它配置为计数至 0 时引起中断; 输入的参数 ticks 为两个中断之...
* @brief Initialize and start the SysTick counter and its interrupt. * * @param ticks number of ticks between two interrupts * @return 1 = failed, 0 = successful * * Initialise the system tick timer and its interrupt and start the ...
Soft_TimerInit(); //初始化软件定时器 Bsp_Init();//初始化底层硬件 StartAutoTimer(0, 1000); /* 启动1个1000ms的自动重装的定时器 */ StartAutoTimer(1, 500); /* 启动1个500ms的自动重装的定时器 */ StartAutoTimer(2, 200); /* 启动1个200ms的自动重装的定时器 */ ...
Timer_setPeriodMicroSecs(TimerSlotHandle, 1000); Timer_start(TimerSlotHandle); Hwi_restore(key); 1. 2. 3. 4. 5. 6. Run mode:有连续模式和一些其他模式,具体见help>timer_create>Timer_Params_init里面有各个参数的说明 2. 法二:代码方式创建 ...