进入路由器和交换机的配置界面: 点击交换机设备,然后在Packet Tracer的底部窗口中选择“CLI”标签页以打开交换机的命令行界面(CLI)。 类似地,点击路由器设备,并在Packet Tracer的底部窗口中选择“CLI”标签页以打开路由器的CLI。 配置交换机和路由器的相关参数以实现连通: 配置交换机: 交换机通常不需要特别的配...
Hi, I'm trying to ping my PC from the Switch 2 to Switch 3's PC, but it keeps failing. I don't know why. I have attached the file of packet tracer topology in which there are 2 routers, 3 switches, 12 PCs on the left and 12 PCs on the right, which a...
This lab will test your ability to configure basic settings such as hostname, motd banner, encrypted passwords, and terminal options on a Cisco Catalyst 2960 switch emulated in Packet Tracer 8.1.1. 1. Use the local laptop connect to the switch console and configure the laptop with the right ...
答：亲亲，配置方法如下:1.鼠标右击网络打开属性2.点击打开本地连接3.点击下方的属性打开4.选择TCP/IPV4打开。5.输入IPV4的地址，点击下方的确定即可。 感谢您的耐心等待。以上是我的全部回复如果对我的服务满意，请给个赞哦，再次祝您事事顺心!平安喜乐!
Normally, a Cisco router should throw an error when you have more than one interface in the same network. But,Packet Traceris often not fully faithful to real devices. Hello Lovish, So you will have to change your subnets. Use the following: ...
switchport 这种方式在神州数码的设备上可以（命令式switchport interface e0/0/1-10），其他的设备行不行不清楚，但是思科设备不能够使用switchport的命令来实现为VLAN添加端口正确的命令是在全局模式下（config）int range [port name](输入端口的名字入f0/1-12)sw mode accsw acc vlan [VLAN ID] (...
Any success you see is a Packet Tracer bug. If you run a ping in simulation mode you will see Switch 2 send an ARP request which gets dropped by Router 4 because it doesn't own the IP that Switch 2 is searching for. Do you want a working config or do you want to solve it ...
android Switch 开关默认 switch进入设置,实验一实验名称:交换机的配置模式的进入与退出步骤1:配置实验环境首先打开CiscoPacketTracer,进入软件后,购买一台交换机步骤2:进入与退出配置模式单击该交换机,进入配置界面,单击CLI进入命令行模式;打一下回车,出现:Swit
Packet Tracer Campus Network Part 2- Answers Part 7- Access Switch IP addresses (3:31) CDP and LLDP Wireshark Quiz CDP, LLDP Lab: Quiz (1:56) CDP, LLDP Lab: Answers (8:32) Routing Introduction Introduction to IP Routing (0:39) Overview (0:35) Routed vs. Routing Protocols...
Im having some trouble I hope I can get help on. I'm working on a final for a cisco course that works in a culmination of what we learned, it has to be built in packet tracer. Here is a break down of the part I'm having a problem with that I hope makes sense.. ...