Using a rotary hammer drill, stanchion anchors are epoxied into the concrete deck, and then nuts are tightened down to secure the slide legs. Adding a water supply to the pool slide complicates things a bit, but is usually tapped off of the pool supply (so it doesn't over-fill the ...
Each securement device includes a ferrule capping the end of the tubular ladder rail adjacent the pool deck which is hingedly connected to the respective anchor in the pool deck, an expandable locking mechanism coupled to the ferrule and extending into the tubular ladder rail which expands into ...
1.Measure the distance between the inside of the pool and the tiles as needed. 2.Mark and drill four pre-drilled holes of 0.4in diameter. 3.Use the included screws and anchors to tighten and complete the installation. Key Features
Just unhook the clips and roll the pool net onto the portable roller. Simply reverse this process to place the pool net back onto the pool. The safety pool net utilizes custom hooks and flush brass anchors in the deck to secure the net. As with all safety barriers the net is only to ...
Assemble the wheelchair lift according to the manufacturer's instructions. Place the lift on the base, and secure it to the concrete with anchor bolts. To cut the holes for the bolts, use a drill with a concrete-cutting bit the same size as the anchor bolts. With the anchors in place,...
Tears streaming I had to pull on the anchors and was weaving around, which must have been a nightmare for anyone trying to pass me, not that I could see them. This was something that continued to affect me on almost every slope, a little dangerous and the last thing I wanted to do ...
The panel is used to assemble and mount a synthetic resin swimming pool and it has a step (1,2,3) at the bottom and a recess at its top (5,6) for fastening the pool liner via a peripheral rail. The lateral walls (7) of the modules are pierced so that they can be bolted ...
The panel is used to assemble and mount a synthetic resin swimming pool and it has a step (1,2,3) at the bottom and a recess at its top (5,6) for fastening the pool liner via a peripheral rail. The lateral walls (7) of the modules are pierced so that they can be bolted ...
Cover for transitable, telescopic and heat-insulated swimming pool (1), characterized essentially by being constituted by modules (2), (3) and (4), (5), which move, the upper ones (4), and ( 5), with its special wheel (15), through a guide rail (6), and the lower ones (2) ...