Gets the first child of the current OpenXmlElement element. (Inherited from OpenXmlCompositeElement) HasAttributes Gets a value indicating whether the current element has any attributes. (Inherited from OpenXmlElement) HasChildren Gets a value that indicates whether the current element has any ...
In this study a large-area phase change was performed using optical laser pulsing to demonstrate the formation of metastable face-centered cubic GeSbTe blocks in the reset state of iPCM resulting from the Ge atom rearrangement to the pre-existing vacancy layers, which will be the basis for the...
TO-based techniques are usually expensive and restricted to a small area, and not easily scalable, especially for complex shapes. In this work, instead, we fabricated the samples by producing the mesh first, then formed the shape post mesh deposition, as dictated by the design. Experimental ...
The adsorption of CO2 into the PMO nanocubes is mainly in physical interaction, therefore the adsorption-desorption process is highly reversible and the adsorption capacity is much dependent on the surface area of the materials. Moreover, the selectivity is also very high (~11 times to N2) ...
Figure 3. A unique aspect of inflatable optics is that the tensioning ring is a static datum between all varifocal states of the optic. The location of the aperture edge is stationary; only the surface slopes and height change within this circular area. Since the position of the UUT within ...
H13 steel has been used as the work material as it is abundantly used in the manufacturing of dyes, which is the major application area of EDM. The hardened H13 steel was used as the work material because it produces more challenges for the tool to maintain its shape during machining. A ...
5.4 As an exception to Rule 5.1, occasional regions in the outermost layer of the hull, foils and rudder may be unpainted, providing that: (a) each region is no more than 0.001 m2; and (b) the total area of these regions does not exceed 0.05 m2 on each hull, foil or rudder. 5.5...
A net shaped latex vacuum bag as used in the fabrication of composite structural parts having complex shapes. Liquid latex is first allowed to air dry in the form of a thin flat, flexible sheet. The latex sheet is then vacuum formed over a tool having th
Surface plasmons can be excited by optical beams using a prism with the attenuated total reflection method as shown by Otto81and Kretschmannet al.82in 1968. Importantly, in the case of metallic particles, the finite surface area can localize the propagation of light and result in localized surfa...
The addition of polycrystalline W2N to the previously developed InGaAs/Ni/W contact was found to suppress In diffusion to the contact surface, leading to improvement of the surface morphology and increase in the total area of InxGa1 − xAs on the GaAs substrate. These improvements are ...