1__be16 eth_type_trans(structsk_buff *skb,structnet_device *dev)2{3structethhdr *eth;45skb->dev =dev;6eth =eth_hdr(skb);78if(netdev_uses_dsa_tags(dev))9returnhtons(ETH_P_DSA);1011if(netdev_uses_trailer_tags(dev))12returnhtons(ETH_P_TRAILER);1314if( ntohs(eth->h_proto) >=...
inteth_header(structsk_buff*skb,structnet_device*dev,u16 type,void*daddr,void*saddr,intlen){//将skb->data = skb->data + ETH_ALEN;structethhdr*eth=(structethhdr*)skb_push(skb,ETH_ALEN);if(type!=ETH_P_802_3)eth->proto=htons(type);// htons()将本地类型转换为网络类型elseeth->proto...
struct ethhdr、ether_header、iphdr、tcphdr、udphdr 结构 ***eth的结构*** struct ethhdr { unsigned char h_dest[ETH_ALEN]; unsigned char h_source[ETH_ALEN]; __be16 h_proto; } __attribute__((packed)); struct ether_header { u_int8_t ether_dhost[ETH_ALEN]; // destination eth addr ...
这个变量表示帧的类型,分类是由L2的目的地址来决定的。这个值在网卡驱动程序中由函数eth_type_trans通过判断目的以太网地址来确定。如果 目的地址是FF:FF:FF:FF:FF:FF,则为广播地址,pkt_type = PACKET_BROADCAST;如果最高位为1,则为组播地址,pkt_type = PACKET_MULTICAST;如果目的mac地址跟本机mac地址不相等,...
length是原始数据部分的长度,sizeof()函数用于获取结构体rte_ether_hdr、rte_ipv4_hdr和rte_udp_hdr的大小(以字节为单位),然后将它们累加到length上得到最终的总长度。 struct rte_mbuf *mbuf = rte_pktmbuf_alloc(mbuf_pool);这一行使用 DPDK 提供的函数rte_pktmbuf_alloc()从指定的内存池中分配一个 RTE ...
const struct ethhdr *eth = skb_eth_hdr(skb); /* send to other bridge ports directly */ if (is_multicast_ether_addr(eth->h_dest)) { skb_reset_mac_header(skb); macvlan_broadcast(skb, port, dev, MACVLAN_MODE_BRIDGE); goto xmit_world; ...
rte_eth_conf 结构体是 DPDK 中的一个数据结构,用于配置以太网设备(Ethernet device)的属性。该结构体定义如下: structrte_eth_conf{ uint32_tlink_speed;/**< ETH_LINK_SPEED_* */ uint32_tlink_duplex;/**< ETH_LINK_[HALF/FULL]_DUPLEX */ ...
mbuf对应的物理地址,一般mbuf物理地址在初始化mempool的时候就设置了,在mbuf对应obj的head里面存放,如下结构体的objhdr里面的iova/physaddr structrte_mempool_objhdr { STAILQ_ENTRY(rte_mempool_objhdr) next;/**< Next in list.*/structrte_mempool *mp;/**< The mempool owning the object.*/RTE_STD_C11...
对以太网设备来说,这个值由eth_type_trans初始化,它主要被流量控制代码使用。 sk_buff->h sk_buff->nh sk_buff->mac 这些是指向TCP/IP各层协议头的指针:h指向L4(传输层),nh指向L3(网络层),mac指向L2(数据链路层)。每个指针的类型都是一个联合,包含多个数据结构,每一个数据结构都表示内核在这一层可以...
__struct_group(ethtool_link_settings_hdr, hdr, /* no attrs */, __u32 cmd; __u32 speed; __u8 duplex; __u8 port; __u8 phy_address; __u8 autoneg; __u8 mdio_support; __u8 eth_tp_mdix; __u8 eth_tp_mdix_ctrl; __s8 link_mode_masks_nwords; __u8 transceiver; __u8 master...