The flat plate type pre-stress tensioning pedestal is characterized in that each tensioning anchor seat consists of a beam, a vertical column and a base, and the tensioning anchor seats are arranged at two ends of the steel bar concrete flat plate; the beams are connected to the upper ends...
The flat plate type pre-stress tension pedestal is characterized in that each tension anchor seat comprises a horizontal beam, stand columns and a base, the tension anchor seats are arranged at the two ends of the reinforced concrete flat plate, the horizontal beams are connected to the upper ...
This study demonstrates that the empirical link between the orientation of horizontal stresses at plate boundaries and the direction of relative plate motion provides a heuristic approach to analyzing stress fields. This stress-analysis approach accounts for the aforementioned factors. Our approach to dete...
The learning location was a flat area adjacent to the pre-test area marked with orange traffic cones spaced 12 m apart. The same person (CH) undertook the learning task procedure for all locations. The trainer stood on the right side of the horse with the reins or lead rope held in the...
Moreover, notches in plates cannot be avoided in design of many parts and come in non-suitable places. This article presents an attempt to evaluate the effect of bi-axial state of stress on the stress concentration factor of flat plates with notches of different shapes such as semi circular,...
From these tests the stress concentration factors around the flat end of a borehole, drilled into each block or model, are determined. It is shown that one of the stress concentration factors is related to Poisson's ratio of the material in which the borehole is drilled....
In this study, a mathematical approach is proposed to calculate the stress distributed around the circular hole of perforated flat plate. This analytical method allows an accurate evaluation of the stress state in the perforated plate. Besides, finite element analysis is carried out to determine the...
EASEBASE Stress Plates for TPO Induction Welding are designed to attach insulation board to roof deck and provide a non-penetrating mechanical attachment of single-ply membranes using an induction-welded bond to the plate. These plates can be used with wood, steel, or structural concrete...
The deformation of injection-moulded parts induced by the residual stress was calculated on the basis of the theory of shells, represented as an assembly of flat elements formed by combining the constant strain and the discrete Kirchhoff triangular element. Experimental research on a flat plate was...
EASEBASE Stress Plates for TPO Induction Welding are designed to attach insulation board to roof deck and provide a non-penetrating mechanical attachment of single-ply membranes using an induction-welded bond to the plate. These plates can be used with wood, steel, or structu...