Switch(config-if)# storm-control broadcast level 10.0Switch(config-if)# storm-control multicast level 5.0Switch(config-if)# storm-control unicast level 2.0 1. 2. 3. 解释: storm-control broadcast level 10.0: 设置广播流量的限制为10% storm-control multicast level 5.0: 设置组播流量的限制为5% sto...
storm-control unicast level 20 10 storm-control action trap storm-control action shutdown service instance 2 ethernet encapsulation dot1q 2 rewrite ingress tag pop 1 symmetric bridge-domain 2 ! service instance 4000 ethernet encapsulation untagged ...
Traffic storm control (also called traffic suppression) allows you to monitor the levels of the incoming broadcast, multicast, and unicast traffic over a 10-millisecond interval. During this interval, the traffic level, which is a percentage of the total available bandwidth of the...
switch (config interface ethernet 1/1) # storm-control unknown-unicast level 50 switch (config interface ethernet 1/1) # storm-control unreg-multicast packets 900 switch (config interface ethernet 1/1) # storm-control all bytes 1 g
storm-control { broadcast | multicast | unicast } min-rate cir min-rate-value-cir max-rate cir max-rate-value-cir storm-control { broadcast | multicast | unicast } min-rate percent min-rate-value-percent max-rate percent max-rate-value-percent undo storm-control { broadcast | multicast...
Forlevel, specify the rising threshold level for broadcast, multicast, or unicast trafficas a percentage (up to two decimal places) of the bandwidth. The port blocks traffic when the rising threshold is reached. The range is 0.00 to 100.00. ...
storm-control Expand storm-control {<broadcast | unreg-multicast | unknown-unicast> | all} {level <level> | { bits <bits> | bytes <bytes> | packets <packets> [k|m|g]}} [force] no storm-control {<broadcast | unreg-multicast | unknown-unicast> | all} The command enables Storm Co...
Storm control可以在交换机接口上限制broadcast,，multicast,以及unicast的流量带宽，在接口上开启了Storm control后，Storm control便开始监控流量从接口到交换机总线的速度，并统计每秒通过的数据包，将当前流量的速度与预先配置好的阀值作比较，阀值分为上限（rising suppression level））和下限（falling suppression level...
1: Monitoring level Usage Guidelines This command can display the storm control for broadcast, unknown multicast, and unknown unicast packets on the interface, such as packet mode, storm control action, and packet status. Example # Display information about storm control onGE1/0/1. ...
各种catalyst系列交换机支持广播,多播和单播抑制情况:开启风暴控制:Switch(config-if)#storm-control[broadcast|multicast|unicast]levellevelSwitch(config-if)#storm-controlactionshutdown一个更高的门限允许更多的包通过,如果把门限值设置成100%意味着将不会限制所有任何的流量。0%意味着所有的广播组播和单播流量都会...