如下图: 再将工程能的模板文件删除掉,找到“stm32f1xx_hal_timebase_rtc_alarm_template.c”和“stm32f1xx_hal_timebase_tim_template.c”并删除,带有template的就是模板文件。 再次编译文件,可以看到没有错误产生了。 6、系统初始化之后的中断优先级分组号和时钟设置 默认情况下调用HAL初始化函数HAL_Init之后,...
(RTC registers, RTC backup data registers) is protected against possible unwanted write accesses. To enable access to the RTC Domain and RTC registers, proceed as follows: (+) Enable the Power Controller (PWR) APB1 interface clock using the __HAL_RCC_PWR_CLK_ENABLE() m...
stm32h7xx_ll_lpuart.c stm32h7xx_ll_mdma.c stm32h7xx_ll_opamp.c stm32h7xx_ll_pwr.c stm32h7xx_ll_rcc.c stm32h7xx_ll_rng.c stm32h7xx_ll_rtc.c stm32h7xx_ll_sdmmc.c stm32h7xx_ll_spi.c stm32h7xx_ll_swpmi.c stm32h7xx_ll_tim.c ...
如下图: 再将工程能的模板文件删除掉,找到“stm32f1xx_hal_timebase_rtc_alarm_template.c”和“stm32f1xx_hal_timebase_tim_template.c”并删除,带有template的就是模板文件。 再次编译文件,可以看到没有错误产生了。 6、系统初始化之后的中断优先级分组号和时钟设置 默认情况下调用HAL初始化函数HAL_Init之后,...