重点看提示:libg_nano.a中未找到定义,链接参数中增加 -specs=nosys.specs 选项,就可以链接通过,其中libnosys.a有系统函数的空实现。 /opt/gcc-arm-none-eabi-10-2020-q4-major/bin/../lib/gcc/arm-none-eabi/10.2.1/../../../../arm-none-eabi/bin/ld: /
I have given it up after many hours, because I always get this error message: ~/.platformio/packages/toolchain-gccarmnoneeabi/bin/../lib/gcc/arm-none-eabi/7.2.1/../../../../arm-none-eabi/lib/thumb/v7-m\libc.a(lib_a-sbrkr.o): In function ...
main.c .text.main+0x2c): undefined reference to `lv_init'c:\st\stm32cubeide_1.4.0\stm32...
很显然,直接在Clion中使用野火或者原子的代码重定向是行不通的,通过观察错误信息可以定位undefined reference to '_xxx',很显然因为我们使用的是ARM_GCC,而Keil是ARMCC,两者的库不一样,ARM_GCC缺少了这些定义导致这样重定向无法使用。 目前通过查阅资料,已知在GCC中想要使用printf()函数是需要重定向_write()函数的(...
~/.platformio/packages/toolchain-gccarmnoneeabi@1.70201.0/bin/../lib/gcc/arm-none-eabi/7.2.1/../../../../arm-none-eabi/lib/thumb/v7-m\libc.a(lib_a-sbrkr.o): In function `_sbrk_r': sbrkr.c:(.text._sbrk_r+0xc): undefined reference to `_sbrk' collect2.exe: error: ld ...
../../lib/libopencv_ts.a(ts_gtest.cpp.obj): In function `testing::internal::UnitTestImpl::~UnitTestImpl()': ts_gtest.cpp:(.text._ZN7testing8internal12UnitTestImplD1Ev+0xa4): undefined reference to `pthread_getspecific' ts_gtest.cpp:(.text._ZN7testing8internal12UnitTestImplD1Ev+0xc0...
All I had to add was to add this in function in my project (easiest is in the main function for access to huart2). Of course change the reference if using a different uart handle. int __io_putchar (int ch) { (void)HAL_UART_Transmit(&huart2, (uint8_t *)&ch, 1, HAL_MAX_...
* @brief This function handles SysTick Handler. * @param None * @retval None*/voidSysTick_Handler(void) { TimingDelay_Decrement(); } 旧代码系统时钟没有配置,采用默认的48M,合并代码后采用了我这边的时钟配置,提高到72M。 旧代码systick中断是设置的1ms一次,合并后采用5us的中断(因为模拟iic需要用的...
1)通过串口控制单片机执行我们期望的函数,同时函数参数最大支持5个,其参数类型支持char、short、int、float及其无符号类型和相应的指针,不支持long及double。 2)对于含有对字符串及数组操作的函数,需要通过数组传值后,在调用函数时写入该变量地址才能实现对这些变量的操作。支持函数返回值得显示。
在前面STM32CubeIDE第一个工程实验的创建工程环节,STM32CubeIDE已经自动在C:\Users\自己的用户名称\STM32Cube\Repository\STM32Cube_FW_MP1_V1.2.0路径中下载好了STM32Cube_FW_MP1_V1.2.0包,这个包就是STM32MP1的固件包,此固件包也可以从ST官网上下载,目前最新版本是1.2.0版本。 ...