Auto Retransmission与***Transmit Pause:这两个都是FDCAN的特性 全部Disable就行 Protocol Exception(协议异常处理):这个打不打开都一样,打开可能有一点点好处,我这里选择了 Enable,关闭也无所谓 Nominal Sync Jump Width(仲裁域的同步跳转宽度) 根据我们上面计算器得到的Sync Jump Width= 10 Data Prescaler、Data Sync...
Auto Retransmission与Transmit Pause:这两个都是FDCAN的特性 全部Disable就行 Protocol Exception(协议异常处理):这个打不打开都一样,打开可能有一点点好处,我这里选择了 Enable,关闭也无所谓 Nominal Sync Jump Width(仲裁域的同步跳转宽度) 根据我们上面计算器得到的Sync Jump Width= 10 Data Prescaler、Data Sync ...
6.Protocol Exception 不需要 8.Nominal Sync Jump width:同步跳跃宽度 1 9.Data Prescaler: 数据分频8 10.Data Sync Jump width:宽度1 11.Data Time seg1:时间参数1 12.Data Time seg2:时间参数2 13.Std Filters Nbr:标准帧接收配置0 14.Ext Filters Nbr:扩展帧 接收配置0 15.Tx FIFO Queue Mode: FIF...
FunctionalState ProtocolException; /*!< Enable or disable the Protocol Exception Handling.This param...
4.4 Informational redundancy Informational redundancy is the most common one when added information is implemented at data and evaluated for compliancy by HW or SW (e.g. implementation of parity bit, ECC, CRC check pattern, data protocoling, data copies etc.). DocID028201 Rev 2 11/20 19 ...
TCP(Transmission Control Protocol,传输控制协议)是一种面向连接的、可靠的传输层协议,它位于OSI七层模型中的传输层。TCP协议主要用于在计算机网络中实现可靠的数据传输,它保证了数据的正确性和顺序性,适用于对数据传输质量要求较高的应用场景,如网页浏览、文件传输和实时数据交换。 TCP协议的核心特性是可靠性和有序性...
Configure CAN/FDCAN to your desired bitrate and map it to relevant tx/rx pins - Make sure yo activate Auto Bus recovery (bxCAN) / protocol exception handling (FDCAN) Activate the RX and TX interrupt on the CAN peripheral Enable a timer for a 1ms overflow interrupt and activate interrupt ...
t.Start();button1.Text = "已连接服务器";button1.Enabled = false;}catch (Exception ex){Set...
( CHAR ucByte ){/* Put a byte in the UARTs transmit buffer. This function is called* by the protocol stack if pxMBFrameCBTransmitterEmpty( ) has been* called. */if(HAL_UART_Transmit(&huart1,(uint8_t*)&ucByte,1,0x01) != HAL_OK){returnFALSE;}else{returnTRUE;}}BOOLxMBPort...
sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); if (ipEndPoint != null) sock.Connect(GetEndPoint(server, port)); } private void btnForward_Click(object sender, EventArgs e) { if (sock != null) sock.Send(new byte[] {48}); ...