Before running the project, open a terminal emulator application on your PC and configure with the serial setup menu the right port to be used and the baud rate of the serial link (in general 115200 baud) Run th
What this does is build thehello world example, run it in the emulator, and then check the logs to ensure that the expected "Hello World!" string was output. Accessing the logs like this makes it possible to create complex tests that output their results to the host throughDebugLog()calls...
All packages installed/configured from this point are going to be done via the command line. In the default desktop environment installed, the default terminal emulator is conveniently called Terminal. To open it up, click on Activities and search, as seen in the screenshot below. Below are th...
embOS J-Trace Real Time Operating System embOS is an RTOS designed to offer JTAG emulator with trace the benefits of a plete multitasking USB driven JTAG interface for ARM cores with system for hard real time lications Trace memory. supporting the ARM ETM (Embed- with minimal resources. ded ...
Before running the project, open a terminal emulator application on your PC and configure with the serial setup menu the right port to be used and the baud rate of the serial link (in general 115200 baud) Run the project in the debug session of STM32CubeIDE (See§2.2.4 Launch project)...