CM---CMSIS标准—Cortex Microcontroller Software Interface Standard—Cortex微控制器软件接口标准 Cmd---command—[kəˈmɑ:nd]—命令、使能 CLK---Clock—时钟 Conf---Config—配置 CPI---每条指令的周期数 CRC---Cyclic Redundancy Check—循环冗余校验 CSR---clock control/status register—时钟控制/状态寄存器...
CM---CMSIS标准—Cortex Microcontroller Software Interface Standard—Cortex微控制器软件接口标准 Cmd---command—[kəˈmɑ:nd]—命令、使能 CLK---Clock—时钟 Conf---Config—配置 CPI---每条指令的周期数 CRC---Cyclic Redundancy Check—循环冗余校验 CSR---clock control/status register—时钟控制/状态...
Cmd---command—[kəˈmɑ:nd]—命令、使能CLK---Clock—时钟Conf---Config—配置CPI---每条指令的周期数CRC---Cyclic Redundancy Check—循环冗余校验CSR---clock control/status register—时钟控制/状态寄存器Ctrl— ---control—控制D:DAC---Digital to analog converter—数/模转换器,数字模拟转换器DAP...
to execute the test (this is the same command that is used bytest_hello_world.sh). What this does is build thehello world example, run it in the emulator, and then check the logs to ensure that the expected "Hello World!" string was output. Accessing the logs like this makes it pos...
“Save Config File” button output formatted DDR registers in DDR_Config_file.txt (check logs for the file location if no project has been created). It calls the “save” command described in Command description table. The tests described in§1.3.4.1 Test descriptioncan be executed in the DD...
Hello, with the most recent versions of JLink, the connection to the STM32H730 takes many tries. Typically I can connect in the JLink command line, but it takes two tries (the first "connect" will not work, while the second "connect" will work). If I…
STM32CubeProgrammer is delivered in GUI (graphical user interface) and CLI (command-line interface) versions. Refer to the STM32CubeProgrammer (STM32CubeProg) software tool on www.st.com. Terminal emulator A terminal emulator software is needed to run the application. It displays some debug ...
4. Once the steps above are executed, reset the target, and connect the terminal emulator via the ST-LINK virtual communication port to get the application menu. Caution: Do not change the product state from OPEN to a higher state without having provisioned the debug authentication (cer...
All packages installed/configured from this point are going to be done via the command line. In the default desktop environment installed, the default terminal emulator is conveniently called Terminal. To open it up, click on Activities and search, as seen in the screenshot below. ...
Stop the emulator. Arguments: None. Example: -> { "execute": "stop" } <- { "return": {} } EQMP { .name = "cont", .args_type = "", .mhandler.cmd_new = qmp_marshal_cont, }, SQMP cont --- Resume emulation. Arguments: None. Example: -> { "execu...