Turn it first approximately 1/8 of a turn counter-clockwise to the vent position to relieve any residual pressure. – Never open the fuel tank while the engine is still hot or running. – Never open the fuel tank or re-fuel the saw near any sparks, flames or other ignition sources. ...
which may be carrying electric current. Do not spray on or near electrical installations. !Warning! To reduce the risk of personal injury, do not direct air blast towards bystanders, since the high pressure of the air flow could injure eyes and could blow small objects at great speed. !
sprocket – cavities toward the outside N Refit washer and E-clip on the crankshaft 44 MS 650, MS 660 Maintaining and Sharpening the Saw Chain Cutting effortlessly with a correctly sharpened chain a A properly sharpened chain slices through wood effortlessly and requires very little feed pressure...
MS 261 C-M 31 English 2 N While maintaining steady, downward pressure, turn the cap slowly counter-clockwise to the vent position (2), approximately a 1/8 turn of the cap. N If any significant venting occurs, immediately re-seal the tank by turning the cap clockwise to the closed ...
: Refit washer and E-clip on the crankshaft. MS 290, MS 310, MS 390 47 English / USA Maintaining and Sharpening Saw Chain Correctly sharpened chain A properly sharpened chain slices through wood effortlessly and requires very little feed pressure. Do not work with a dull or damaged chain ...