Here is my complete conversion chart for all standard capacitor values. This chart allows one to convert between picofarads, nanofarads, and microfarads. With all the values listed here, you will not have any need to use a calculator....
Over time, a series of standard capacitor values have evolved, just as with resistors and inductors. Capacitors are available
A 10 pF Reference Standard CapacitorHersh, J F
A capacitor has a value of one farad when one coulomb of charge causes a potential difference of one volt across it. Its equivalent expressions in other SI units are: Since the farad is a very large unit, values of capacitors are usually expressed in microfarads (?F), nanofarads (nF)...
A capacitor has a value of one farad when one coulomb of charge causes a potential difference of one volt across it. Its equivalent expressions in other SI units are: Since the farad is a very large unit, values of capacitors are usually expressed in microfarads (?F), nanofarads (nF)...
6.8pF Capacitance Tolerance 0.25pF Lead Spacing 5.9mm Product Length 11.4mm Product Height 11.08mm Operating Temperature Max 125°C Qualification - Find similar products Voltage(DC) 500V Capacitor Terminals PC Pin Capacitor Case / Package Radial Leaded Product Width 4.3mm Operating Temp...
❼Nominal capacitance〔pF〕 example 0R5 0.5 010 1 100 10 ※R=decimal point ❺Dimension tolerance △Standard △=Blank space ❷Series name MMultilayer ceramic capacitor ❸End termination K Plated ❽Capacitance tolerance C±0.25pF D±0.5pF F±1pF J±5% K±10% ⓫Packaging Fφ178mm...
Scale - 1:1,5 General Information: X2-Safety Class Capacitor THB; MKP - Metallized Polypropylene Operating Temperature -40 °C up to +110 °C Storage Conditions (in original packaging) 5 °C up to + 35 °C; 10 % up to 75 % RH Maximum Selfheating (Rated) 10 Moisture Sensitivity ...
The stability circuit comprises a 27-Ω resistor and a 20-pF capacitor (GQM1875C). The DC block capacitors are 100 pF (GQM2195C Murata), the bypass capacitors are 12 pF (GRM1885C Murata), and the decoupling capacitors are 1 µF. The input matching circuit is designed while considering...
Capacitor C2 ensures that the (+) input is at AC ground potential and should have a low reactance at the lowest input frequency. Since under normal circuit conditions, the (−) input will be at the same DC potential as the (+) input (+7.5 volts in the present case), capacitor C1 ...