I've been trying to create a stackwise virtual link between a couple of C9500-48Y4C switches. I've configured the stackwise virtual domain on both switches and configured the interfaces that we're going to use for the link. Reloaded the switches but they continue to act independent of ...
Stackwise Virtual Link Dual Active DetectionLink Multi-ChassisEther-channel StackWiseVirtual links(SVL) 2台交换机之间,可以使用10G或者40G接口直连, 配置为SVL链路. SVL上所有的数据包会被添加64-Byte SV包头(StackWise Virtual Header).只有开启了SV的交换机才能识别SVH. 以下场景,流量会通过SVL转发. -在一个...
• While configuring the stackwise-virtual and stackwise-virtual link commands via CLI or NETCONF replace, the values are stored in the CONFD configuration database, but they are not reflected in the IOSd running configuration until the write memory (or wr mem) command is...
Device(config)# interface FortyGigabitEthernet1/1/1 Device(config-if)#stackwise-virtual link 1 stackwise-virtual dual-active-detection To configure an interface as dual-active-detection link, use the stackwise-virtual dual-active-detection command in the interface co...
The method comprises: designating a first plurality of links from a first stack segment to a second stack segment as a first etherchannel link; designating a second plurality of links from the first stack segment to a third stack segment as a second etherchannel link, where the second stack ...
在range的端口内执行“ stackwise-virtual link”命令后,交换机将自动捆绑这些链路以形成Port-channel。 无需再手动配置Port-channel或指定协议。交换机将自动创建具有内部协议的Port-channel。 ③配置双活检测(dual-active detection) 该配置需要配置在非SVL接口上 ...
Dual-Active-Detection link (blue link) If the standby switch detects a complete loss of the StackWise Virtual link, it assumes the active switch has failed and will take over as the active switch. However, if the original StackWise Virtual active switch is still operational, both the switches...
The method comprises: designating a first plurality of links from a first stack segment to a second stack segment as a first etherchannel link; designating a second plurality of links from the first stack segment to a third stack segment as a second etherchannel link, where the second stack ...
The method comprises: designating a first plurality of links from a first stack segment to a second stack segment as a first etherchannel link; designating a second plurality of links from the first stack segment to a third stack segment as a second etherchannel link, where the second stack ...
The method comprises: designating a first plurality of links from a first stack segment to a second stack segment as a first etherchannel link; designating a second plurality of links from the first stack segment to a third stack segment as a second etherchannel link, where the second stack ...