阅读了该文档的用户还阅读了这些文档 5 p. SSPC SP 5 8 p. SSPC SP 7 7 p. SSPC标准目录 2 p. SSPC SP 1 2 p. SSPC SP 2 18 p. SSPC SP 13 5 p. sspc ab 3 2 p. sspc sp 3 5 p. sspc ab 3 8 p. SSPC PA 2 发表评论 验证码: 换一张 匿名评论 提交 ...
4.1 Before blast cleaning,visible deposits of oi l (grease)or other contaminants shal l be removed in accordance with SSPC-SP 1 orother agreed upon methods 2.2 Random staining shal l be l imited to no more than 33 percent of each unit area of surface as de,ned in Section 26,and may...
SSPC-SP 6 commercial blast cleaning (NACE No. 3) allows for stains or shadows up to 33 percent of each unit area of surface to remain.
Explanatory Notes A.1 FUNCTION: Commercial blast cleaning (SSPC-SP 6/NACE No. 3) provides a greater degree of cleaning than brush-off blast cleaning (SSPC-SP 7/NACE No. 4), but less than near-white blast cleaning (SSPC-SP 10/NACE No. 2). It should be specified only when a ...
NACE NO. 3-1994由美国防腐工程师协会 US-NACE 发布于 1994。 NACE NO. 3-1994 联合表面制备标准.商业喷丸清理.项目编号21067.SSPC-SP 6的最新版本是哪一版? NACE NO. 3-1994已经是当前最新版本。 标准号 NACE NO. 3-1994 1994年 发布单位
2-1994 联合表面制备标准.近白色合金喷丸清理.项目编号21066.SSPC-SP 10 NACE NO.3-1994 接缝表面处理标准商业喷砂清理(货号 21067;SSPC-SP 6) NACE NO. 8-1998 工业喷丸清理.项目编号21088.SSPC-SP 14 NACE NO. 4-2000 刷清喷丸清理.项目编号21068.SSPC-SP 7 ...
NACE WAB-3/SSPC-SP 6 (WAB) Standard Practice SSPC Surface Preparation Standard NACE WAB-3/SSPC-SP 6 (WAB) Commercial Wet Abrasive Blast Cleaning This NACE International/SSPC: The Society for Protective Coatings joint surface preparation standard represents a consensus of those individual members who...
1、NACE WAB-3/SSPC-SP 6 (WAB) Standard Practice SSPC Surface Preparation Standard NACE WAB-3/SSPC-SP 6 (WAB) Commercial Wet Abrasive Blast Cleaning This NACE International/SSPC: The Society for Protective Coatings joint surface preparation standard represents a consensus of those individual members...
6/SSPC-SP 13 Surface Preparation of Concrete This NACE International (NACE)/SSPC: The Society for Protective Coatings standard represents a consensus of those individual members who have reviewed this document, its scope, and provisions. It is intended to aid the manufacturer, the consumer, and ...
本标准不同于SSPC-SP 15,商业级动力工具打磨标准,在SP 15中允许锈迹, 油漆,或轧制铁鳞留在表面,而SP 11只允许这些残留在腐蚀麻坑的底部。 2. Definition 2. 定义 A steel surface cleaned with power tools to bare metal, when viewed without