1、精选优质文档-倾情为你奉上附录A SSPC表面处理标准 SP-1 溶剂清洗 SP-2 手工工具处理 SP-3 机动工具处理 SP-4 燃烧处理 SP-5 彻底喷砂(白金属) SP-6 中度喷砂 (商用) SP-7 轻度喷砂 (普通) SP-8 浸酸 (化学处理) SP-9 风化后再以钢丝刷打磨 SP-10 彻底喷砂(接白) SP-11 机动工具处理至...
metal blast cleaned (SSPC-SP 5) with a nominal anchor profile from 1.5-3.5 mils (38-88 micrometers) (Section 10.4) and coated with the zinc-rich paint. The panels shall be blast cleaned and coated on both sides and all edges. The ...
SSPC-SP 5/NACE 1喷砂清理到金属表面呈完全的金属光泽 SSPC-SP 6/NACE 3经济型喷砂清理 SSPC-SP 7/NACE 4扫砂清理 SSPC-SP 8酸洗法清理 SSPC-SP 10/NACE 2喷砂清理到表面呈金属光泽 SSPC-SP 11动力工具除锈至金属表面呈金属光泽 SSPC-AB 1天然矿石与工业废渣磨料 SSPC-TR 1/NACE CG 1994有关热力学方法...
SSPC SP 5 with a nominal anchor profile from 1 5 3 5 mils 38 88 micrometers Section 10 4 and coated with the zinc rich paint The panels shall be blast cleaned and coated on both sides and all edges The paint shall be spray applied and hardened in accordance with manufacturer s ...
如果钢结构表面涂装低潮湿性的底漆或处于专门恶劣的环境中,如化学环 境中或浸没在水中——不管海水依旧淡水,则钢结构表面的氧化皮必须应 喷砂除去,最低达到SSPC-SP10(白金属喷砂清理标准)的标准。钢材表面的初始状况 按照钢材表面预处理的目标,钢材表面的初始状况决定了施工过程中 的工作量、施工时刻和施工成本。从...
sspc-paint20:1991富锌底漆中英版.pdf,SSPC-Paint 20 November 1, 1982 Editorial Changes August 1, 1991 SSPC: The Society for Protective Coatings PAINT SPECIFICATION NO. 20 Zinc-Rich Primers (Type I, Inorganic, and Type II, Organic) 1. Scope 2.2 PIGMENTATIO
SSPC-Paint 20：1991_富锌底漆_中英版 SSPC-Paint 20 November 1, 1982 Editorial Changes August 1, 1991 SSPC: The Society for Protective Coatings PAINT SPECIFICATION NO. 20 Zinc-Rich Primers (Type I, "Inorganic," and Type II, "Organic")1. Scope 1.1 This specification covers one group of ...
运输机sspc-sp尊瑞公司sspc航空等级韦克威 -- 200 韦克威 -- ￥2.0000万1~4 台 ￥1.9800万5~9 台 ￥1.8000万>=10 台 深圳韦克威科技有限公司 2年 -- 立即询价 查看电话 QQ联系 机载机载sspc尊瑞公司sspc高抗震韦克威 -- 200 韦克威
water), 2C (fresh water immersion), 2D (salt water immersion), 3A (chemical, acidic), 3B (chemical, neutral), and 3C (chemical, alkaline); and is intended for spray application over steel surfaces prepared in accordance with SSPC-SP 6, Commercial Blast Cleaning, or SSPC-SP 8, Pickling...
Test panels shall be solvent cleaned in accordance with SSPC-SP 1 prior to blast cleaning. The test panels shall be blast cleaned in accordance with SSPC-SP 5 and have a blast pro?le of 44 to 57 micrometers (1.75 to 2.25 mils). Measure the blast pro?le in accordance with ASTM D ...