// If using software SPI (the default case): #defineOLED_MOSI 11 #defineOLED_CLK 13 #defineOLED_DC 7 #defineOLED_CS 6 #defineOLED_RESET 8 Adafruit_SSD1306display(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS
不建议使用NB的U8glib,因为这个库强大到哭,所以编译和下载都太消耗时间了 <ignore_js_op> 3、接线 从参考资料里面扒的接线图 时钟模块这里不做详细说明,OLED的模块引脚对应关系如下图 <ignore_js_op> arduino uno和nano的接线一摸一样 ARDUINO UNO OLED D13-SCK--- RES D12-MISO--- CS D11-MOSI--- ...
ARDUINO 2560 OLED D52 -SCK---RES D50-MISO---CS D46- MOSI---D1 D53-SS---D0 D51-MOSI---D/C #include <SPI.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #define OLED_MOSI 11 #define OLED_CLK 13 #define OLED_DC 9 #define OLED_CS 10 #define OLED_RESET 8 Ad...
15,"drawCircle");u8g2.drawCircle(stx,sty-1+with,r,U8G2_DRAW_UPPER_RIGHT);//右上SEND_...
Arduino的Adafruit_GFX库为我们所有的LCD和OLED显示器提供了通用语法和图形功能集,也就是说这是一个通用图形库,并不针对特定的显示器型号,它是父类。 Adafruit_GFX库始终与每种特定显示类型唯一的附加库一起使用,子类库依赖父类库-例如,ST7735 1.8英寸彩色LCD需要安装Adafruit_GFX,Adafruit_ZeroDMA 和 Adafruit_ST...
The use of OLED is very simple with the Arduino. The only requirement is the library and the circuit. The library is interfaceable with both SPI and I2C libraries. Even both the size and types of OLED operates able with the library. Here, the following circuit will use in I2C OLED. ...
#ifndef MAIN_SSD1366_H_#define MAIN_SSD1366_H_// Following definitions are bollowed from // http://robotcantalk.blogspot.com/2015/03/interfacing-arduino-with-ssd1306-driven.html// SLA (0x3C) + WRITE_MODE (0x00) = 0x78 (0b01111000)#define OLED_I2C_ADDRESS 0x3C// Control byte#...
第一点的事情是对于屏幕的初始化,SPI和I2C的连接。 代码语言:javascript 代码运行次数:0 运行 AI代码解释 https://github.com/olikraus/u8g2/wiki/u8x8setupcpp 初始化的构造方法在这里 代码语言:javascript 代码运行次数:0 运行 AI代码解释 #include <Arduino.h> #include <SPI.h> #include <U8x8lib.h...
arduino project or integrating it into an adafruit display setup, this module's compatibility with IIC and SPI interfaces ensures seamless integration with a wide range of microcontrollers, including Arduino and STM32. **Efficient and Reliable Performance** The module's SSD1306 driving chip ensures ...
Using the HiLetgo SSD1306 128x64 with an Arduino Uno/4W_HW_SPI, I found that on each call to sendBuffer(), a few scan lines were shifted +1px to the right. This repros with NONAME_F and NONAME_2, but not NONAME_1 or VCOMH0_*. Which scan lines are shifted appears to be ran...