配置SQUID支持透明代理SQUID服务的默认配置并不支持透明代理,因此需要调整相关设置。对于2.6以上版本的SQUID服务,只要在http_port配置行加上一个“transparent”(透明)选项,就可以支持透明 SQUID 服务 原创 WZ941104 2018-05-06 10:37:53 962阅读 3点赞 ...
http_port 192.168.1.1 transparent visible_hostname proxy.linuxfan.cn http_access allow all /etc/init.d/squid restart 2.设置iptables规则,将访问HTTP的数据重定向给代理服务器 iptables -t nat -I PREROUTING -i eth1 -s 192.168.1.0/24 -p tcp --dport 80 -j REDIRECT --to-ports 3128 客户端设...
http_port 192.168.1.1 transparent visible_hostname proxy.linuxfan.cn http_access allow all /etc/init.d/squid restart 2.设置iptables规则,将访问HTTP的数据重定向给代理服务器 iptables -t nat -I PREROUTING -i eth1 -s 192.168.1.0/24 -p tcp --dport 80 -j REDIRECT --to-ports 3128 客户端设...
1、实现透明代理Transparent Proxy 路由功能需打开:echo 1 > /proc/sys/net/ipv4/ip_forward squid: http_port 192.168.0.45:8080 transparent acl allow all iptables -t nat -A PREROUTING -i eth1 -s 192.168.10.0/24 -p tcp --dport 80 -j REDIRECT --to-ports 8080 client: route add default gw...
(a) Configuring Squid Proxy (b) Making squid work in Transparent way So (a) is for those who want squid working and if you want squid in transparent way then go for (a) and (b) both. But before making squid transparent make sure you have seen ...
Transparent Proxying with SquidJennifer Vesperman
Lately I've been trying to get a squid server to work with WCCP on our network so that client traffic transparently goes through the proxy. The problem is, having very little experience with squid, I've hit a brick wall and despite spending days searching the web and reading through tons...
摘要: This paper discusses the methods to realize the transparent proxy using iptables and squid under Linux 2.4 kernel conditions. The results show that the proposed method provides a solution of the problem as limited IP address space, low network speed, troublesome client setting .关键词:...
反向代理(Reverse Proxy)方式是指以代理服务器来接受internet上的连接请求,然后将请求转发给内部网络上的服务器,并将从内部服务器上得到的结果返回给internet上请求连接的客户端,此时代理服务器对外就表现为一个服务器。 反向代理流程说明: SQUID作为反向代理服务器,通常工作在一个服务器集群的前端,在用户端看来,SQUID...
The options to activate in the/etc/squid/squid.conffile to get the transparent proxy up and running are: httpd_accel_hostvirtual httpd_accel_port80 # the port number where the actual HTTP server is located httpd_accel_with_proxyon