In an attempt to use part of the cable as a cat-5 cable I punched a patch cable into the blocks on both ends, on empty pairs. When I put my el-cheapo cat5 continuity tester on the run it lights up all wires in the correct order. When I put a fancier tester on the run it t...
Colorful Split Keyboard Uses VGA Connections November 19, 2022 by Kristina Panos 14 Comments When it comes to building a split keyboard, you have a lot of options when it comes to the cable. Many will use a standard 3.5 mm TRRS cable, and others might use something more esoteric like ...
These clever devices carry two Ethernet connections across a single wire. The sharing kit includes two splitter devices. The splitter consolidates two Ethernet connections into one RJ45 cable, which is then carried to the destination over a single wall plate connection or a coupler. The second spl...
In a 4-degree ROADM node, the four sides are split into four NEs and in an 8-degree ROADM node, the eight sides are split into eight NEs. To manage these nodes, virtual passive devices are used. The virtual passive devices are connected using virtual PPCs that can be configured in CTC...
All units must be daisy chained with the VE.Bus cable (RJ-45 cat5). The sequence for this is not important. Do not use terminators in the VE.Bus network. The temperature sensor can be wired to any unit in the system. For a large battery bank it is possible to wire multiple ...
Comm error appeared to require that user disconnect USB cable and restart the Robot Controller app to recover. robotControllerLog.txt would have error messages that included the words "E RobotCore: lynx xmit lock: ### abandoning lock:" Includes fix to correctly list the parent module address fo...