** *SPI message structure*/structrt_spi_message {constvoid*send_buf;void*recv_buf; rt_size_t length;structrt_spi_message *next; unsigned cs_take :1; unsigned cs_release :1; };/** * SPI configuration structure*/structrt_spi_configuration { rt_uint8_t mode; rt_uint8_t data_width;...
SPI_IOC_WR_MAX_SPEED_HZ: 设置SPI设备的最大通信速率。 SPI_IOC_MESSAGE(N): 一次进行N次双向或多次读写操作。 4.2 SPI测试实验将上述设备树以及驱动修改之后更新板卡的内核,通过SPI设备文件来判断spi驱动是否加载成功 这里测试使用的是spi1这一组spi相关接口,检查spi设备: root@linaro-alip:~# ls /dev/spi*...
检查是否定义了transfer_one_message函数,如果没有定义,则将其设置为默认的spi_transfer_one_message函数。 调用spi_init_queue函数初始化队列。这个函数可能会设置队列的相关参数,分配内存等。 如果spi_init_queue返回非零值,表示初始化队列出现问题,会打印错误信息,并跳转到错误处理标签err_init_queue,然后返回错误码...
struct rt_spi_message *rt_spi_transfer_message(struct rt_spi_device *device, struct rt_spi_message *message) 其中第二个参数,消息的结构体,这也是发送消息的关键: /** * SPI message structure */ struct rt_spi_message { const void *send_buf; /* 发送缓冲区指针,其值为 RT_NULL 时, 表示本...
spi控制器遵循linux的设备模型框架,所以,一个spi控制器在代码中对应一个挂在platfrom bus下面的一个device设备。所以在板级的代码中为SPI控制器定义一个platform_device结构即可。spi的platform_device其实就是spi_master即spi主机。下面以Samsung的SOC芯片:S32440,做为例子,看看如何定义这个platform_device。以下的代码来...
* SPI message structure */ structrt_spi_message { constvoid*send_buf;/*发送缓冲区指针,其值为RT_NULL时, 表示本次传输为只接收状态,不需要发送数据。*/ void*recv_buf;/*接收缓冲区指针,其值为RT_NULL时, 表示本次传输为只发送状态,不需要保存接收到的数据*/ rt_size_tlength;/*发送/接收数据字节...
linux spi,前言: linuxspi驱动分层架构包括,应用层、系统调用层、spi接口层、spi核心层、spi驱动层、spi从设备,本博客首先分析spi-platfrom设备驱动的注册,从设备m25p80是如何绑定到spi总线上,在platform探测函数是如何注册spi-master主设备的,其次通过从设备spina
Structure of SPI message description file Hiearchy of XML elements is shown below. Indentation indicates hierarchy, symbols ?, +, and * have the same meaning as in regular expressions (? - zero or one occurrence, + - one or more occurrences, * - zero or more occurrences, no symbol means...
if(ioctl(fd, SPI_IOC_MESSAGE(2), xfer)<0) perror("SPI_IOC_MESSAGE"); usleep(100*1000); }while(1); // close device node close(fd); return0; } spidev_testApplication There is aspidev_testapplication that you can configure in Buildroot. ...
int (*transfer)(struct spi_device *spi, struct spi_message *mesg) 目前已经可以不用我们自己实现该回调函数,初始化时直接设为NULL即可,目前的通用接口层已经实现了消息队列化,注册spi_master时,通用接口层会提供实现好的通用函数。现在只有一些老的驱动还在使用该回调方式,新的驱动应该停止使用该回调函数,而是...