它们将被传入一个spi_mem对象,它只是一个围绕spi_device对象的简单包装,我们引入一个不同的对象的原因是,我们希望能够拓展spi_mem对象,并在需要时附加更多的信息(例如存储器类型,存储器组织方式和其他的高级SPI控制器可能需要的信息)。 当驱动想要执行SPI存储器操作时,它将填充spi_mem_op结构并调用spi_mem_exec_o...
它们将被传入一个spi_mem对象,它只是一个围绕spi_device对象的简单包装,我们引入一个不同的对象的原因是,我们希望能够拓展spi_mem对象,并在需要时附加更多的信息(例如存储器类型,存储器组织方式和其他的高级SPI控制器可能需要的信息)。 当驱动想要执行SPI存储器操作时,它将填充spi_mem_op结构并调用spi_mem_exec_o...
int(*adjust_op_size)(structspi_mem *mem,structspi_mem_op *op); bool(*supports_op)(structspi_mem *mem, conststructspi_mem_op *op); int(*exec_op)(structspi_mem *mem, conststructspi_mem_op *op); constchar*(*get_name)(structspi_mem *mem); int(*dirmap_create)(structspi_mem_dir...
int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op); bool (*supports_op)(struct spi_mem *mem, const struct spi_mem_op *op); int (*exec_op)(struct spi_mem *mem, const struct spi_mem_op *op); const char *(*get_name)(struct spi_mem *mem); int (*dirmap_c...
Controllers can use this function to perform basic sanity checking on the spi-mem op. Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Pratyush Yadav Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>2024-04-bpi CI-BUILD...
现在让我们看下控制器端。一个希望优化SPI存储器操作的SPI控制器,可以实现spi_mem_ops接口,该接口包含三个直接对应用户API的方法: ->exec_op():执行存储器操作,如果不支持则返回-ENOTSUPP。 ->supports_op(): 检查这个存储器操作是否支持。 ->adjust_op_size(): 调整存储器操作的数据传输大小,以符合对齐要求...
spi_mem_default_supports_op is used internally by controller drivers to verify operation semantics are correct. It is used internally inside spi-mem but has not (in U-Boot) been declared in spi-mem.h for external use. Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Pra...
对于非存储 SPI 设备,SPI 驱动只支持标准 SPI 模式,即 Single Mode,数据传输都使用一根线进行(MOSI 和 MISO)。 对于 SPI 存储设备(SPI NAND/SPI NOR),通过对接spi-mem框架,可以支持 DUAL SPI 和 QUAD SPI。 相关代码: staticconststructspi_controller_mem_ops aic_spi_mem_ops = { .supports_op = aic_...
ret=IFMS_MemCMAFree(t_para.cma_block2); if(ret<0) { printf("CMA free failed.\n"); return -1; } pthread_exit(0); } void main(int argc, char **argv) { pthread_t tidp; sigset_t set; unsigned int size = 0, expries = 0; ...
hdma_rx.Init.MemInc = DMA_MINC_ENABLE; // 内存地址递增 hdma_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; // 外设数据对齐:字节对齐 hdma_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; // 内存数据对齐:字节对齐 hdma_rx.Init.Mode = DMA_NORMAL; // 启用普通模式,如果需要循环模式...