spdk_top 应用程序类似于标准 top,它通过 SPDK 轻量级线程和轮询器提供对 CPU 内核的使用情况进行实时反馈。spdk_top 应用程序使用 RPC 命令调用来收集性能指标并将它们显示在报告中,这样您就可以分析和确定您的代码是否有效运行,以便您可以调整您的实现并从 SPDK 中获得更多。 为什么经典的top实用程序不适用于 SPDK?
This patch adds debugging information to spdk_top that are intended to help determine core that process tasks other than spdk. Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Change-Id: Ie836f6073dc9fce844b81b098388a974843945c0 Reviewed-on: https://review.spdk.io/gerrit/c/...
FE 并未执行到 2.4G 个周期,CPU 占用率只有 8%,这也就说得通了。 使用spdk_top工具查看 Reactor 的转速,每秒大概 20 万次,而正常情况应该在 200 万次左右,仅为 10%。 再次打开 top 工具,按下 1 键,显示了每个 CPU 核心的使用率。可见,24 号核心的使用率确实是 100%。到底是被谁占用了呢? 好吧,先...
spdk_top 应用程序类似于标准 top,它通过 SPDK 轻量级线程和轮询器提供对 CPU 内核的使用情况进行实时反馈。spdk_top 应用程序使用 RPC 命令调用来收集性能指标并将它们显示在报告中,这样您就可以分析和确定您的代码是否有效运行,以便您可以调整您的实现并从 SPDK 中获得更多。 为什么经典的top实用程序不适用于 SPDK?
2 app/spdk_top/spdk_top.c @@ -2005,7 +2005,6 @@ display_thread(struct rpc_thread_info *thread_info) c = wgetch(thread_win); switch (c) { case 10: /* ENTER */ case 27: /* ESC */ stop_loop = true; break; @@ -2230,7 +2229,6 @@ show_poller(uint8_t current_page)...
分析定位:使用spdk_top显示0号核相对其他核更加忙碌,继续加压,0号核忙碌程度增加而其他核则增加不明显。 查看poller显示rbd只有一个pollerbdev_rbd_group_poll,与nvmf_tgt_poll_group_0都运行在id为2的thread上,而nvmf_tgt_poll_group_0是运行在0号核上的,故bdev_rbd_group_poll也运行在0号核。
使用spdk_top工具检查Reactor的转速时发现,每秒转速仅为20万次,正常情况应该在200万次左右。再次使用top工具查看,发现24号核心的使用率实际上是100%,但FE进程的CPU占用率依然异常低。进一步分析确认,有36个CPU核心达到了100%的使用率,但进程占用率并未达到相应的水平。考虑到异常的CPU使用率,怀疑...
“常通风、勤洗手、戴口罩、少聚集。”SPDK发布v20.04新版本啦! 该版本含了以下主要的新特性:spdk_top: 新加的工具,允许用户来监控SPDK相关程序的资源... Target等等)将逐步不再支持,会在后面的版本中去掉。建议切换到JSON-RPC配置文件或者基于RPC的实时配置方法。 完整的changelog,可以访问下面的链接: https ...
The SPDK NVMe-oF RDMA transport is implemented on top of the libibverbs and rdmacm libraries, which are packaged and available on mostLinuxdistributions. It does not use a user-space RDMA driver stack through DPDK. offload和硬件具体实现有关系,那么就会用到厂商自己的驱动,DPDK中也有厂商自己的驱动...
Finally, SPDK providesNVMe-oF,iSCSI, andvhostservers built on top of these components that are capable of serving disks over the network or to other processes. The standard Linux kernel initiators for NVMe-oF and iSCSI interoperate with these targets, as well as QEMU with vhost. These servers...