Intspdk_thread_poll(structspdk_thread*thread,uint32_tmax_msgs,uint64_tnow){// 首先先处理ring传递过来的消息msg_count=_spdk_msg_queue_run_batch(thread,max_msgs);// 调用非定时poller中的方法TAILQ_FOREACH_REVERSE_SAFE(poller,&thread->active_pollers,active_pollers_head,tailq,tmp){// 调用poller...
1Int spdk_thread_poll(structspdk_thread *thread, uint32_t max_msgs, uint64_t now) {2//首先先处理ring传递过来的消息3msg_count =_spdk_msg_queue_run_batch(thread, max_msgs);4//调用非定时poller中的方法5TAILQ_FOREACH_REVERSE_SAFE(poller, &thread->active_pollers,6active_pollers_head, ta...
之前提到spdk_reactors_init方法中调用了spdk_thread_lib_init方法传入了创建thread的spdk_reactor_schedule_thread方法,在调用spdk_thread_create会回调该方法。这个方法它主要的功能就是告诉这个新创建的线程绑定创建该线程的reactor。 spdk_reactor_schedule_thread(struct spdk_thread *thread) { // 得到该线程设置的c...
在SPDK层面这个thread 被称之为reactor,reactor thread执行一个函数reactor_run,主核直接调用该函数,从核由rte_eal_remote_launch 分发该执行函数;该函数的主体是一个while(1) {}的功能函数,直到reactor的state被改变才会退出(主要接收spdk_app_stop的响应)。如此,reactor thread 就会100%的占用CPU资源, 那么SPDK的...
换言之,假设一个使用SPDK编程框架的应用运用了两个CPU core,那么每个core上就会启动一个Reactor thread。如此一来,用户怎么执行自己的函数呢?为了解决该问题,SPDK提供了一个Poller的机制,即用户定义函数的分装。SPDK提供的Poller分为两种:(1) 基于定时器的Poller;(2) 非定时器的Poller。SPDK的Reactor thread对应的数...
spdk_io_channel: 之前的含义是指 給特别为上面IO设备分配的线程;现在是指和某个spdk_io_device绑定的per-thread的上下文context. spdk 事件框架 现在直接调用 spdk_app_start() 为你打理所有下面的准备工作: spawning one thread per core, pinning each thread to a unique core, ...
首先,spdk_thread是执行线程的抽象,spdk_poller是一个应该在给定线程上定期调用的函数的抽象。 在用户希望与SPDK一起使用的每个系统线程上,它们必须首先调用spdk_thread_create()。 该库还定义了另外两个抽象:spdk_io_device和spdk_io_channel。 抽象地说,我们将设备概括为spdk_io_device,将特定于线程的队列概括为...
SPDK提供的poller分两种:基于定时器的poller和非定时器的poller。在reactor的while(1)循环中,它会不停的check这些poller的状态,进行相应的调用,同时I/O也会得到相应的处理。由于单个core上只有一个reactor thread,所以同一个reactor thread 中不需要一些锁的机制来保护资源。
c thread = spdk_get_thread() 此外,在注册 io 设备之前将 UT 更改为 set_thread() dev->create_cb = create_cb = bdev_daos_io_channel_create_cb dev->destroy_cb = destroy_cb tmp = RB_INSERT(io_device_tree, &g_io_devices, dev) -> io_device_tree_RB_INSERT(&g_io_devices, dev) -...
(3)iou+k:不使用系统调用,即使用内核线程轮询I/O的提交,同时应用轮询I/O的完成(fio的参数是sqthread_poll) 环境配置如下表: P.S. 虽然io_uring里提供了io_uring_enter作为提交I/O请求和捕获完成的I/O请求的统一接口,但FIO里面还是分开使用了(即调用了两次io_uring_enter)。