起源和目标地址(Source and Destination Addresses) IP选项(options)主要用于控制和测试两大目的。 wushaolin2012.blog.163.com|基于38个网页 2. 源地址和目标地址 源地址和目标地址(Source and Destination Addresses):这两个段都是32bit。标识了这个IP包的源地址和目标地址。
# interface GigabitEthernet1/0/0 ip address 1.1.1.1 255.255.255.0 nat server protocol tcp global 1.1.1.3 ftp inside 192.168.1.2 ftp //Configure the NAT server function on the outbound interface to ensure that external users can access the internal server. # ip route-static 0.0.0.0 0.0.0.0 ...
Run ip anti-attack source-ip equals destination-ip drop { all | slot slot-id } The device is configured to discard the IP packets with identical source and destination IP addresses. By default, the device forwards the IP packets with identical source and des...
source 是源地址，destination是目的地址，都是IP地址。源地址表示这个IP包是从哪里发出的，目的地址表示这个IP包是要发往哪里的。
aA packet with a source IP address of 192.168.2.4 and a destination IP address of 10.1.1.4 arrives at the HokesB router 一个小包以192.168.2.4来源IP地址和10.1.1.4目的地IP地址到达在HokesB路由器[translate]
Sometimes, they put destination at source column and always forget to put either TCP/UDP. Normally they only put the number of the ports. Here is the example of the form. Source IP Destination IP Service (TCP/UDP) Port Number 1 2 3 Therefore, I would appreciate if...
A packet with a source IP address of 192.168.2.4 and a destination IP address of 10.1.1.4 arrives at the HokesB router问题补充:匿名 2013-05-23 12:21:38 与一个192.168.2.4的源IP地址和目标IP地址为10.1.1.4的数据包到达在hokesb路由器 匿名 2013-05-23 12:23:18 一个数据包,其源ip...
IPCS TO FORMAT THE TRACE (A quick guide) (a) Start packet tracing Use this vary command to start a packet trace (nb there are synonyms): V TCPIP,tcpprocname,PKT,ON,FULL,IP=ipaddr|*,SRCP=port,DEST=port 1) ipaddr is the destination or source IP address (or * = all addresses)....
aSpecifically, these addresses identify the source and destination End Systems by assigning the Network_ID to the 2nd byte and the Equipment_ID to the 3rd byte of the IP address. 具体地,这些地址鉴别来源和目的地结束系统通过分配Network_ID到第2个字节和Equipment_ID到IP地址的第3个字节。[translate...
After a service is connected to AAD, the actual source IP address of the traffic forwarded by AAD is concealed once it reaches the server. The source IP address of the cu