5.←4r VFigure 3Figure 3 shows a uniform solid S formed by joining the plane faces of two solid right circular cones, of base radius r, so that the centres of their bases coincide at O. One cone,with vertex V, has height 4r and the other cone has height kr, where k 4(a) Fin...
When generating a solid mesh (steps 1 and 2 in figure below), the message "Meshing Failed" is given (step 3). This occurs in Nastran In-CAD (version 2019.2 or older) and Inventor Nastran (version 2020.0 and newer). Figure 1: Solid mesh ends...
The steel edges of the ski or snowboard have no contact with the bearing faces in the plane in the horizontal position so that the steel edges are set slightly above the solid snow surface. The track face of the ski or snowboard has a radius across the running direction which corresponds ...
The steel edges of the ski or snowboard have no contact with the bearing faces in the plane in the horizontal position so that the steel edges are set slightly above the solid snow surface. The track face of the ski or snowboard has a radius across the running direction which corresponds ...
The steel edges of the ski or snowboard have no contact with the bearing faces in the plane in the horizontal position so that the steel edges are set slightly above the solid snow surface. The track face of the ski or snowboard has a radius across the running direction which corresponds ...
Figure 2. 31P MAS NMR spectra of NaPON glasses with increasing nitrogen contents: N/P = 0.19, 0.28, 031, 0.41, respectively (see Table 2 for the deconvolutions). Spectra were deconvoluted into three Gaussian-like curves attributed to resonances of PO4, PO3N and PO2N2 structural units. ...
Figure 11 shows the distribution of temperature of each component for case C with different flow arrangements. It is found that the maximum temperature of the co-flow is located in the anode outlet of the cell, and the maximum temperature is 1124 K. While for the counter-flow, the maximum...