配置SNMP对端的监控系统用snmpwalk来测试出现error in packet怎么解决？看这个报错是报文错误，可以抓包看...
Acme Packet 3900 - Version E-Cz8.3.0 and laterInformation in this document applies to any platform.SymptomsCustomer is trying to setup snmpv3 with authPriv. When they run snmpwalk from the far end SNMP server towards sbc, they get the error "snmpwalk: Authentication failure (incorrect password...
lies in the authentication settings most likely? I'm simply running sudo snmpwalk -v3 -t 10 -u testuser -a MD5 -A password123 -l authNoPriv -n v3context -x DES 127.0.0.1 system only to receive the following error: sess_process_packet: resending message id#1238060702 reqid#1528862053 rp...
snmpwalk -v3 … -c public 127.0.0.1 F5-BIGIP-SYSTEM-MIB::sysIpsecSpdStatTunnelState which produces output like this line: F5-BIGIP-SYSTEM-MIB::sysIpsecSpdStatTunnelState.”/Common/tunnel-01″.58401 = STRING: up But I cannot take that as it is and use it in an snmpget like this: ...
Solved: Hello, I'm using a Cisco Prime Infra 3.6 (Patch 2). I have the same problem with two "WS-C2960S-24TS-L" version 12.2(53)SE2 for the first and 15.2(2)E9 for the second one. I am using SNMP v3 (MD5/AES128 and try at first with