linkDown 1.5.3 linkUp 1.3.6.1.6.3.1.1. authentica 5.4 Failure 1.3.6.1.6.3.1.1. egpNeigh 5.5 oss reload 发送错误消息 通知(Cisco syslog Syslog MIB). 使用log history / level命令指定 / CISCO- 1.3.6.1.4.1.9.9. clogMess SYSLOG-MIB 41.2.0.1 enerated 要发送的消息 的级别. 语音 发送...
enable traps through snmp-server enable traps ospf cisco-specific retransmit snmp-server enable traps snmp-server enable traps To enable all Simple Network Management Protocol (SNMP) notification types that are available on your system, use the snmp-server enable trapscommand in global configuration ...
snmp是一种硬件管理的协议，配置了snmp服务器，通过snmp协议，可以远程管理服务器或交换机路由器等硬件设备。
# "snmp-server enable traps snmp authentication linkdown linkup warmstart coldstart", # "snmp-server enable traps frame-relay", # "snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency", # "snmp-server enable traps dlsw", # "snmp-server enable ...
[authentication | coldstart | linkdown | linkup | warmstart] | storm-control trap-rate value | stpx [inconsistency] [root-inconsistency] [loop-inconsistency] | syslog | tty | vlan-membership | vlancreate | vlandelete | vtp] no snmp-server enable traps [bgp | bridge [newroot] [topology...
(config)# end Router# more system:running-config | include traps snmp snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart Router# configure terminal Router(config)# no snmp-server enable traps snmp linkup linkdown Router(config)# end Router# more system:running-...
snmp-server enable traps through snmp-server enable traps ospf cisco-specific retransmit snmp-server enable traps ospf cisco-specific state-change through snmp-server enable traps voice poor-qov snmp-server engineID local through snmp trap link-status startup (test boolean) through write mib-data In...
Router(config)# snmp-server enable traps snmp Router(config)# snmp-server enable traps envmon Router(config)# snmp-server host 10.0.0.0 public snmp envmon The following example shows how to enable the router to send all traps to the host myhost.cisco.com using the community string public:...
Router# show mpls traffic-eng auto-tunnel backup State: Enabled Tunnel Count: 3 (up:2, down: 1) Tunnel ID Range: 65436-65535 Create Nhop only: Yes SRLG: Not configured Delete unused tunnels after: 50 Seconds Config: Unnumbere...
本文檔介紹在思科裝置上配置snmp-server enable traps 命令時傳送的陷阱。 必要條件 需求 思科建議您瞭解以下主題: 如何在思科裝置上配置簡單網路管理協定(SMNP)。 使用SNMPget 和walk 命令。 採用元件 本檔案適用於執行Cisco IOS® (支援SNMP)的Cisco裝置(路由器和交換器)。本文檔中的資訊基於Cisco IOS®的...