Traphost list: Target host name: nms2 Traphost address: 10.1.1.2 Traphost portnumber: 162 Target host parameter: trapnms2 Total number is 1 Parameter list trap target host: Parameter name of the target host: trapnms2 Message mode of the target host: SNMPV3 Trap version of the target hos...
snmp-agent target-host trap ipv6 address udp-domain ipv6-address [ udp-port port-number | vpn-instance vpn-instance-name ] * params securityname security-name [ v3 [ authentication | privacy ] | private-netmanager | notify-filter-profile profile-name | ext-vb ] * IPv6网络只支持Trap方式...
snmp group GroupName user UserName security-model {v1 | v2c | v3} [{volatile | nonvolatile}] no snmp group GroupName user UserName security-model {v1 | v2c | v3} Syntax Description GroupName - Name of the SNMP group UserName - User name security-model - Security model volatile...
snmp-agent target-host inform address udp-domain { ipv4-target-host | ipv6 ipv6-target-host } [ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string { v2c | v3 [ authentication | privacy ] } 缺省情况下,未配置Inform报文的目的主机。 仅SNMPv2c和...
snmp-agenttarget-hosttrapaddressudp-domain{ip-address|ipv6ipv6-address} [udp-portport-number] [dscpdscp-value]paramssecuritynamesecurity-string[v1|v2c|v3[authentication|privacy] ] 可选 如果要将Trap信息发送给NMS,该步骤为必选,并将ip-address指定为NMS的IP地址 ...
snmp-agent target-host trap address udp-domainx.x.x.x [udp-portport-number]params securitynamesecurity-string [v1/v2c/v3{authentication/privacy}] 取消trap主机的地址:undo snmp-agent target-hostx.x.x.xsecuritynamesecurity-string 10.配置防火墙位置(syslocation) syslocation是mib中system组的一个管理变...
当监控网络设备时,首先在Server和被监控设备上都设置SNMPv3。 01 设置网络设备 通过CLI配置Cisco网络设备 1.为SNMPv3用户定义一个组(snmpv3group),设置读权限,有权限访问MIB树的某些分支。 代码语言:javascript 复制 snmp-server group snmpv3group v3 priv read snmpv3name ...
snmp-agent target-host trap address udp-domain 192.168.100.100 udp-port 162 params securityname moxian v3 privacy //配置推送SNMP远程主机IP和端口(由于监控是远程主机主动来取数据,这个可以不用配置) snmp-agent mib-view included internet internet //定义用户自定义名称internet添加到设备的MIB视图的internet节...
Step 3. Trap Destination(V3) Tab: Target Address: Address of NMS server from where the trap will be running(ex. Blr-ong-lnx10). UDP Port: Any port number where the trap will be listened(Ex. 9977). User Name: Name of the User in the User tab. Security ...
(optional)(config)# snmp-server contact <contact-number> Cat 9800 WLC上的SNMPv3配置 GUI: 注意:從17.1 Cisco IOS XE開始,Web UI僅允許您建立只讀v3使用者。您需要運行CLI過程來建立讀/寫v3使用者。 CLI: 點選V3 users並建立使用者。選擇authPriv、SHA和AES protocols,...