The snmp-agent trap enable feature-name securitytrap command enables the trap function for the attack source tracing module. The undo snmp-agent trap enable feature-name securitytrap command disables the trap function for the attack source tracing module. By default, the trap function is...
To restore the trap functions of all modules to the default status, run the undo snmp-agent trap enable or undo snmp-agent trap disable command. To disable the trap function for a specified module, run the undo snmp-agent trap enable feature-name command. To delete all the trap function ...
[Agent] snmp-agent sys-info location telephone-closet,3rd-floor # Enable SNMP notifications, specify the NMS at 192.168.100.4 as the SNMP trap destination, and use readtest as the community name. [Agent] snmp-agent trap enable [Agent] snmp-agent ...
privacy-mode aes128 123456TESTencr&!# Configure contact and physical location information for the agent.[Agent] snmp-agent sys-info contact Mr.Wang-Tel:3306[Agent] snmp-agent sys-info location telephone-closet,3rd-floor# Enable SNMP notifications.[Agent] snmp-...
配置trap主机的地址: snmp-agent target-host trap address udp-domainx.x.x.x [udp-portport-number]params securitynamesecurity-string [v1/v2c/v3{authentication/privacy}] 取消trap主机的地址:undo snmp-agent target-hostx.x.x.xsecuritynamesecurity-string 10.配置防火墙位置(syslocation) syslocation是mib中...
Traps For each protocol the community uses, enter the port number (162 by default) for the source port (Local) and destination port (Remote) for trap packets sent to SNMP managers in this community, then enable traps for that protocol.Enable...
acting on its own without a direct query. This special instance involves a trap. A trap is set up from the management side on the agent; however, the management system does not need to go to the agent to find out if the trap information has been tripped. The agent sends an alert to...
1. 启动/关闭SNMP Agent 服务 在系统视图模式下: 启用:snmp-agent 关闭:undo snmp-agent 注:缺省情况下snmp agent 是关闭的 2. 使能或禁止SNMP 相应版本 在系统视图下: 使能SNMP 协议相应版本:snmp-agent sys-info version v1 Snmp-agent sys-info version v2c ...
agent manager instances" ::= { starentHAMgr 1 } starHATtlArrived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of home agent session requests" ::= { starentHAMgr 2 } starHATtlRejected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS ...
Agent Chapter 11. AdaptingSNMP to Fit Your Environment Section11.1. General Trap-GenerationProgram Section 11.2 Who's Logging into My Machine? (I-Am-In) Section 11.3. Throw Core Section 11.4. Veritas Disk Check Section 11.5. Disk-Space Checker Section 11.6. Port Monitor Section11.7. ...