• Two LEDs (RED), blinks in normal condition and becomes stationary during fire • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m...
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling heigh...
Smoke Alarm Off Blinks every 1 second Pattern Smoke has been detected. ADT has been contacted. Press the recessed test switch to silence the smoke detector sounder for 5 minutes. If necessary, silence the alarm keypad.Remove the source of the smoke, if it can be done safely. If necessary,...
Red LED Figure 1 Wireless smoke detector external components Device Indicators Green LED Power up Both LEDs blink every 5 seconds Normal (standby) Blinks every 10 seconds Sensitivity out of Off range Smoke alarm Off Low battery Off Red LED Both LEDs blink every 5 seconds Off Blinks every ...
Asenware AW-D101 smoke detector is an intelligent smoke detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given a specific ID, which allows the panel to continuously monitor specific detector lo...
Asenware AW-D101 smoke detector is an intelligent smoke detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given a specific ID, which allows the panel to continuously monitor specific det...
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire alarm condition. • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. N FPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up...