• Two LEDs (RED), blinks in normal condition and becomes stationary during fire • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up to 3.15 m...
Asenware AW-D101 smoke detector is an intelligent smoke detector, which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (devices) can be given a specific ID, which allows the panel to continuously monitor specific detector lo...
These Trouble Conditions apply to the Ademco Honeywell 5806W3 wireless smoke detector. This smoke detector has 2 LEDs and a sounder to indicate the detector’s status.State Green LED Red LED Sounder Action Normal (Standby) Blinks every 10 seconds Off Off The device is operating normally. No ...
Red LED Figure 1 Wireless smoke detector external components Device Indicators Green LED Power up Both LEDs blink every 5 seconds Normal (standby) Blinks every 10 seconds Sensitivity out of Off range Smoke alarm Off Low battery Off Red LED Both LEDs blink every 5 seconds Off Blinks every ...
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire • Remote test from Panel Product Description Model No AW-D101 D/C 1712 Operating Voltage 18V-28VDC Alarm Current 3mA Work Current 2.5mA Temperature -10C to 50C Smoke sensitiv...
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. NFPA 72 suggests for low airflow application spacing of 9.1 m for ceiling heigh...
• Two LEDs (RED), blinks in normal condition and becomes stationary during fire alarm condition. • Remote test from Panel Spacing Spacing of detector must be followed by standard EN 54 or NFPA 72. N FPA 72 suggests for low airflow application spacing of 9.1 m for ceiling height up...