Said engine has improved heat management properties in the area of the heat susceptible CVT by means of using a V-belt of resinous material, allowing reduced friction and dimensions of the CVT and a close compact arrangement of the drive and driven pulleys (55, 56) having a small gap (b)...
To crank the engine, install the belt on the pulleys, then pull out on the starter/generator with a fabricated handle to tighten the belt. After the engine starts, release the starter/generator and flip the belt off. But use caution doing this for an obvious reason!
Accompanied by the clanging warning bell, the squealing of cables rolling through pulleys, and the vibration of the misaligned car guide rail we were rumbled three stories up and onto the shop floor. He punched his time card, letting me do the same with one he had made up for me, ...
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order...
Since the CVT doesn't have to pull the car from a start, it can have smaller pulleys and belts. Those who get the manual transmission can use the “smart” feature, of matching engine revs on downshifts without that heel-and-toe stuff; the new gearbox is 15 pounds lighter (88 pounds ...
The two preventers that I kept continuously rigged, which ran from the cockpit to pulleys at the bow via 3/8-inch, 8-brait line, and attached to boom-length sections of Dyneema, which were luggage-tagged around the boom’s aft end, worked perfectly as the boom never budged. I had cen...
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suctio...
Said engine has improved heat management properties in the area of the heat susceptible CVT by means of using a V-belt of resinous material, allowing reduced friction and dimensions of the CVT and a close compact arrangement of the drive and driven pulleys (55, 56) having a small gap (b)...