compared to the parameters specified in the slurm.conf file then either fix the node or change slurm.conf. If the reason is "Not responding", then check communications between the control machine and the DOWN node using the command "ping " being sure to specify the NodeAddr values configured...
因此需要把节点调为idle状态。 输入:scontrol show node可以看到故障原因为Not_responding 输入以下命名可以解决: scontrol update NodeName=node0 State=DOWN Reason=Not_responding slurmd restart scontrol update NodeName=node0 State=RESUME 再输入sinfo -N时节点状态已经为idle了。 提交任务测试可以看到,提交上去...
* NODE_STATE_NO_RESPOND if not * responding */ bool not_responding; /* 设置该值如果没有响应,日志记录后清除 */ time_t boot_req_time; /* 节点启动请求的时间 */ time_t boot_time; /* 节点启动时间,由up_time计算 */ uint32_t cpu_bind; /* 默认 CPU 绑定类型 */ time_t slurmd_start...
2.目前集群所有机器的配置文件是一样的,如果修改了请把所有机器的conf都相应修改掉 3.查看各个节点的情况 scontrol show node如果出现not responding说机器通信有问题 4.如果要看上述3中的机器的具体原因可以查看每台机器的具体日志,目录为/var/log/slurmd.log 在master上还可以查看/var/log/slurmctld.log 5.如...
首先是要设好安装源。我采用了国内阿里源。下面这个可用。我是在/etc/yum.repos.d中新建一个bak文件...
如果node状态为down,slurm Reason=Not responding,重启服务无效的话,可以试一下下面命令 scontrolupdate NodeName=node01 State=RESUME scontrolupdate NodeName=node02 State=RESUME scontrolupdate NodeName=node03 State=RESUME scontrolupdate NodeName=node04 State=RESUME ...
(e.g.-vvvvvv). You can use one window to execute "slurmctld -D -vvvvvv", a second window to execute "slurmd -D -vvvvv". You may see errors such as "Connection refused" or "Node X not responding" while one daemon is operative and the other is being started, but the daemons ...
-N, --Node Node-centric format -o, --format=format format specification -O, --Format=format long format specification -p, --partition=PARTITION report on specific partition -r, --responding report only responding nodes -R, --list-reasons list reason nodes are downordrained ...
NodeName=node[01-08] CPUs=16 RealMemory=16000 State=UNKNOWN >> PartitionName=batch Nodes=node[01-08] Default=YES MaxTime=INFINITE >> State=UP >> >> >> 2018-01-15 16:43 GMT+01:00 Carlos Fenoy <minibit at gmail.com>: >> >>> Are you trying to start the slurmd in the head...
• -N, –Node:以每行一个节点方式显示信息,即显示各节点信息。 • -ppartition 、–partition=partition:显示partition分区信息。 • -r 、–responding:仅显示响应的节点信息。 • -R 、–list-reasons:显示不响应(down 、drained 、fail或failing状态)节点的原因。 • -s:显示摘要信息。 • -S...