* 整合式回转率控制(slew-rate control)与快速输出放电选择TPS229xx系列主要优势,则包括:* 2A的最大电流可确保其适 … pdt.acesuppliers.com|基于8个网页 2. 控制电压回转率 在论文最后,提出在混压介面电路上的控制电压回转率(slew-rate control)的电路设计。这样的电路设计可以帮助改善在电源线 … ...
如避免大量引脚同时开关,把要同时开关的引脚均匀的分布在期间上,以便它们有不同的参考回路等等。 由于每个I/O管脚多有独立的Slew-rate control,所以对I/O的Slew Rate 设置很灵活,可以根据每个管脚的具体情况进行相应的设计。 在Cyclone IV中,下列情况下是不能进行Slew Rate 分配的 1.用了OCT功能的管脚。 2.在...
求翻译:Slew–Rate Control是什么意思?待解决 悬赏分:1 - 离问题结束还有 Slew–Rate Control问题补充:匿名 2013-05-23 12:21:38 Slew–Rate 控制 匿名 2013-05-23 12:23:18 思乐-率控制 匿名 2013-05-23 12:24:58 沼泽率控制 匿名 2013-05-23 12:26:38 Slew–Rate 控制 匿名 2013-...
那意思是Slew Rate Control的配置具体和硬件的差异性有关,需要根据硬件信号IBIS完整性仿真结果决定 组合状态, 和DDR3 运行在1333/1066/800MTS,并无直接关系, Rate字面上并不是DDR运行速率的意思 是这样理解吗?
Slew-rate control enabled, up to 5.7 kV (rms) galvanically isolated single-channel gate driver families with reinforced isolation (VDE 0884-11) Slew-rate control enables on-the-fly gate resistor adjustments during operation, thus simultaneously improving system efficiency and electromagnetic interfe...
Slew-rate control enabled, up to 5.7 kV (rms) galvanically isolated single-channel gate driver families with reinforced isolation (VDE 0884-11) Slew-rate control enables on-the-fly gate resistor adjustments during operation, thus simultaneously improving system efficiency and electromagnetic interference...
Slew Rate Control, Power ICs manufactured by Vishay, a global leader for semiconductors and passive electronic components.
1EDS20I12SVEiceDRIVERSafe型号的驱动器元件首次采用可通过IGBT实时调节的转换速率控制(SlewRateControl,简称“C”)。1EDS-SRCEiceDRIVERSafe的安全电气隔离符合VDE0884-10的严格规范,并已专门开发出短路保护功能。此次展出的驱动器元件具有广泛的应用范围,在隔离电压高达1200V的应用中可体现出极高的系统效率。
A slew-rate-control (SLC) circuit is coupled to an input for a driver circuit to provide a first binary value when the circuit is powered on and to control a slew rate when a pass element controlled by the driver circuit is enabled. The SLC circuit includes a capacitor node for coupling...
A slew-rate controlled, 800Mbps voltage mode differential transmitter is presented here. An add-on, capacitive charge transfer based scheme is used to control output rise/fall times. The transmitter, designed and fabricated in a 65nm CMOS technology, occupies an active area of 0.02mmand consumes...