Multiple ledger plies shall be fastened together per code independent of the SDS screws. SDS screw spacing values (above) are equivalent to 2021/2018 IRC Table R507.9.1.3(1) and 2015 IRC Table R507.2, based on testing of the Strong-Drive SDS screw with a factor of safety of 5.0. ...
Related Literature Product Information Table Load Tables Prescriptive Tables Code Reports & Compliance Drawings Related ProductsHome Connectors Wood Construction Connectors Bases and Caps Column Caps SDS Screw Column Caps CCQ™ CCQ™ Column Cap, Quick-Install The...
Strong-Drive SDS Heavy-Duty Connector screws are supplied with the holdown to ensure proper fasteners are used Predeflected seat eliminating deflection under load No stud bolts to countersink at openings Material See table Finish Galvanized Installation See General Notes for Holdowns and Tension Ties....
Router end of beam for screw heads for flush installation. The carried member may be sloped up or down to 45° with full table loads. Warning This connector requires special attention to ensure correct installation. The beam must be installed perpendicular to the support member. The connection...